Top 10 Kenmore 54501 Dehumidifier Questions & Answers

Kenmore 54501 Dehumidifier Logo

Question

  • 17,288 People Helped

Dehumidifier does not collect water.

I have a Kenmore 54501 dehumidifier that will run for days and not collect water. When I got it new, about two years ago, it did fine. The fan is OK and I cleaned the filter. Still no water. It is in the 12'X 18' basement room and has worked fine until recently. Any suggestions? Thanks, Paul

Posted by on

Answer

  • Most Helpful of 5 Answers

My unit does not collect water any more. It was fine until I lent it to my brother in law and it was returned damaged. Do you know how to fix this

Posted on Mar 28, 2009

Question

  • 1,520 People Helped

Dehumidifier Kenmore 580.54501

Where can I buy a drain hose connector? Can't find on sera parts list. Thanks! Paul

Posted by on

Answer

  • Most Helpful of 2 Answers

hose connector is Sears part # 5214A20027A

dehumidifer is Model # 58054501300 or 58054501400

use these numbers on searspartsdirect.com

Posted on Jul 29, 2008

Question

  • 1,579 People Helped

Connector hose inside dehumidifier leaks

We purchased a connector hose from Sears. The connection inside the dehumidifier (not the external connection to the hose that goes to the drain) leaks, so the bucket below fills - not what we want to happen. We can't seem to tighten the connection enough so there is no leakage.

Posted by on

Answer

  • Most Helpful of 1 Answers

let me know if you still have this

Posted on Dec 19, 2007

Question

  • 1,580 People Helped

How to connect drain hose?

I know I am going to kick myself when I get the answer...... I can't figure out how to connect the drain hose to the dehumidifier. I lost the manual. Thanks!

Posted by on

Answer

  • Most Helpful of 1 Answers

You need the white pipe that came with it. Remove the circle on the back left of the unit with pliers or a screwdriver. Take out the bucket. screw the hose to the pipe. Push the pipe through the hole in back and break through the rubber membrane. In front, connect the white pipe to the elbow pipe at the top. Make sure the smaller tab on the white pipe (back of machine) is pointing down and the larger one up. The smaller tab goes behind the back cover and (sort of) holds the pipe in place. You still need the bucket in place for the machine to turn on.

Posted on Sep 25, 2007

Question

  • 2,188 People Helped

my kenmore 50 pint dehumidifier 54501 runs but it

my kenmore 50 pint dehumidifier 54501 runs but it does not taking in water

Posted by on

Answer

  • Most Helpful of 1 Answers

You need to determine what's "running". Here's why: There are three things that must be working to extract water. The 'coil' (a finned metal part that needs air to flow across its surface) may be filled with dust and obstructions, so no air can move...then no water. There is a blower motor that must move the air. If it is seized up and not blowing air...very little or no water. The compressor creates condensation from air moving across the coil (like the moisture than forms on an ice filled glass on a humid day) to extract the water from the air. If it's not working then no water.
So, if there is air blowing out of the dehumidifier the blower is working. If the air is room temp the compressor is not working. If it's real hot air, and the humidifier keeps cycling on and off quickly, the coil is dirty. Those are the 3 things that need to be working.

Posted on Jul 31, 2009

Question

  • 5,142 People Helped

polar wind dehumidifier: p1 or p2 code after emptying tank.

Can't clear the code unless I unplug to unit.

No reference the code P1 or P2 anywhere in the manual. Otherwise unit is worknig fine. It's just a curiousity.

Posted by on

Answer

  • Most Helpful of 3 Answers

P1 error indicates that:

  1. The water tank on the side of the unit is full.
  2. The water tank in not properly seated in the housing.
  3. The switch at the back of the water tank housing is not engaged or is loose

Posted on Sep 01, 2009

Question

  • 2,343 People Helped

Bucket full light flashing but not full, humidity % shows as 01%

power is on, bucket full light is flashing (it is not full) and % humidity shows as 01%. It was set for 55%. I cannot change the % above 01%. I cleaned the filter....no good. I turned it off and then on again and the humidity % briefly showed 55%, unit came on, then a second later turned off and display goes back to 1% and bucket full light starts flashing??????????

Posted by on

Answer

  • Most Helpful of 5 Answers

I posted an extended answer to this problem with part replacement info and pictorial. Why hasn't this solution been posted???
venasguy@comcast .net

Posted on Mar 04, 2010

Question

  • 6,862 People Helped

unit iceing uo

unit runs all the time and the ice build up just gets thicker. Sut unit down ice meltsthen builds up as soon as pluged in. Air filter is clean.

Posted by on

Answer

  • Most Helpful of 1 Answers

Hi,
Dehumidifiers freezing up can be causes by a few different problems.
Here is a tip that I wrote to help people with the freezing dehumidifier problem....

Dehumidifier is Freezing up and not working
http://www.fixya.com/support/r4662033-dehumidifier_freezing_up_not_working

heatman101

Posted on May 04, 2010

Question

  • 1,800 People Helped

I have a Classic D15

I have a Classic D15 (home hardware) dehumidifier and it's running but not collecting water. It's only about 6 months old. Not sure if I have the receipt for it or I'd take it back. Any suggestions. The filter is clean.

Posted by on

Answer

  • Most Helpful of 1 Answers

Hi,
There are many reasons why a dehumidifier willnot work or collect water.
Here is a tip that I wrote to help people to figure out what is going wrongwith their dehumidifier

Dehumidifier is running but no water is in bucket

heatman101

;
'';

Posted on Aug 13, 2011

Question

  • 1,706 People Helped

54501 Kenmore Dehumidifier. It

54501 Kenmore Dehumidifier. It sounds like it is running, but no water is in the bucket

Posted by on

Answer

  • Most Helpful of 1 Answers

Hi,
There are many reasons why a dehumidifier willnot work or collect water.
Here is a tip that I wrote to help people to figure out what is going wrongwith their dehumidifier

Dehumidifier is running but no water is in bucket

heatman101

=
-=-
][[
]\

Posted on Sep 07, 2011

353 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Dehumidifiers Experts

Cindy Wells

Level 3 Expert

6688 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Kenmore Dehumidifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

54501 Dehumidifier Kenmore

  • 54501 Dehumidifier Kenmore

Most Popular Question

change filter

  • Dehumidifiers
Loading...