20 Most Recent
Kenmore 33169 Gas Single Oven - Page 6 Questions & Answers
My kenmore oven will not come on and none of the burners clickp
If this was after a power outage make certain you are getting 240 volts. If not, it could be the breaker is slightly unseated. If you turn on the oven and then the ignition for the burners spark it is probably the power to the line. I saw this on another Fixya post for my Kenmore range and I solved the problem by firmly snapping in the breaker.
Kenmore model oven door won't open after self cleaning .
Self cleaning operates at a very high temperature compared with cooking, so sometimes they have a solenoid or bimetal mechanism to lock the door so you don't inhale noxious fumes or start fire during cleaning. It is supposed to be disengaged ate end of cleaning when things cool down, so it sounds like it may be stuck? See if you can figure out the lock mechanism and try opening it by gently shaking the door while prying with a knife. Search online for a spare parts diagram from the model number and that may give you clues on how to get it open.
Clock display won't stay lit
Same thing happened to our Kenmore range and I found a solution on the web about fixing this problem on a fridgedaire range. It was to hold down the clock button for an extended time ~15 sec. It worked for our kenmore and hopefully for yours too.
I have an F029 error code on my Kenmore Elite double wall oven, what does it mean?
Communication between the user interface board and the touch panel can't be initiated
Disconnect power to the unit, wait 30 seconds and restore power. If the error returns, disconnect electrical power and check the wire harness connections between the user interface control board and the touch. Reconnect any loose wires or replace the wire harness if damaged. If you just replaced the user interface control board or the touch panel, you may have used the wrong part. Use your range model number to check the part number and install the correct replacement part. If you didn't replace a part before the code appeared and the wire harness connections are okay, replace the touch panel. If the problem continues, replace the user interface control board.
Not finding what you are looking for?