20 Most Recent Life Fitness Stamina 1205 Precision Rower - Page 2 Questions & Answers

The link for the photos is not working. You may be able to view the numbers on the device using a polarized light or filter. Some are laser etched and hard to see if normal light.

BAD BOARD POSSIBLY

There are lots of service manuals for that model! Some show the board https://www.manualslib.com/manual/875944/Life-Fitness-97ti.html?page=185#manual ..

It can only be the motor, the bearing or the mat. The first thing to do it check the mat tension.

sadly no one can diagnose things like that without being there to test it

CONTACT THE MANUFACTURR WE ARE NOT FAMILURE WITH THAT MAKE SORRY

Go to the Menu and read the details

The treadmill has a 'folding' feature for the incline setting. A safety switch must be reading this feature as not locked. Try this. Set the incline to 0% and the speed to zero. Step in front of the treadmill and using both hands carefully raise the whole front until the legs click and lock into place. To lower the treadmill kneel behind the treadmill. Place your Right hand on the belt and lean your weight on it. At the back of the treadmill on the Left side panel is a lever. Pull this lever until the treadmill stops lowering.

try resetting the system

The only thing left to check are the sensors in the grips and the wiring.

page 9 of manual https://www.manualslib.com/manual/93822/Life-Fitness-95x.html?page=9#manual

https://ceomacelritingganpeheartlinksubsves.wordpress.com/2015/05/18/life-fitness-active-step-pedometer-instruction-manual/ This should be what you need

Likely the excitation to the alternator in this recumbent bike has dropped out, but there may be other causes. You might start with this reference, which is how to access the various components:

very possible. after i moved many miles away i had to disconnect and reconnect theconnectors on my Lifestepper

Electronics are blown.