Yukon NVMT (4x50) Monocular - Answered Questions & Fixed issues

'it does not have objective lens'?! Yes, it could be the reason why you cannot see anything. Your NVMT should have a lens in both ends. It's just a regular telescope with some extra features.

Yukon NVMT... | Answered on Oct 24, 2009 | 220 views

The scope may flicker or flash when used in a bright environment. To fix this you should only use a NVMT in a dark. It will restore itself in a few minutes or hours, depending on how long it has been exposed to light.
It may also flicker for the first several seconds of use in dark, before the device corrects itself.
With a severe exposure to bright light for prolonged time the light enhancing unit may damage beyond repair.

Yukon NVMT... | Answered on Oct 24, 2009 | 208 views

Hello, don't worry about it. It is HV to the image intensifier tube. The battery voltage goes through control circuit then to ccfl inverter (here is were dc voltage is switch on and off and switch dc voltage is step up by toroid coil that has two input and only two out puts). By impulsing the coil with two different switch dc voltage on the input this make the current lag the two different phase voltage by 90 degrees. Here is where the strange noise is coming from. The toroid coil is encased in iron case and if half of this iron case is loose, it makes case vibrate so the noise.

Now, the voltage come out of the toroid coil is switching dc (one could call it AC because that what AC voltage is, it switch between positive to negative) this voltage is about 300 to 900 switching DC voltage. This voltage will be applied to a 1/2 wave voltage multiplier (this voltage multiplier with have anywhere four four stages to 10 stages depend on what the input voltage to multiplier is.

Low the voltage out of the ccfl inverter the more stages the multiplier will have.

Now, the voltage multiplier will double the voltage per stage to need image intensifier tube voltage of 12000 to 45000 volts---DC switching or AC what ever one wants to call it. This voltage will bit you but it doesn't have a lot current associated with it, the current would be in the 10 to 15 ua (micro-amps) 1/10X6 amps.

Now, you know. GB...stewbison

Yukon Optics | Answered on Sep 24, 2011 | 349 views

Fixya does not supply manuals. Google the make and model info, followed by the word manual.

Optics | Answered 2 days ago | 17 views

nothing here

Optics | Answered on May 16, 2019 | 18 views


Optics | Answered on May 01, 2019 | 24 views

Value depends on its condition and and type (upright, baby grand, full grand etc.)
Serial number suggests around the year 1900 but certainly before 1910

Optics | Answered on Apr 29, 2019 | 21 views

Request the information directly from H & R.

Optics | Answered on Apr 27, 2019 | 34 views

Read the Manual:


Optics | Answered on Apr 24, 2019 | 23 views

Back or front ?

Optics | Answered on Apr 21, 2019 | 29 views

put a dead mouse on it

Optics | Answered on Apr 21, 2019 | 28 views

he i need a tripod to reflector telescop 525

Optics | Answered on Apr 14, 2019 | 355 views

50 cents

Optics | Answered on Apr 14, 2019 | 28 views

Not finding what you are looking for?
Yukon NVMT (4x50) Monocular Logo

4 questions posted

Ask a Question

Usually answered in minutes!

Top Yukon Optics Experts


Level 3 Expert

84625 Answers

John Porter

Level 2 Expert

95 Answers

Bill Boyd

Level 3 Expert

53745 Answers

Are you a Yukon Optic Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides