20 Most Recent
Jaeger-lecoultre Compressor 1728470 Wrist Watch - Page 8 Questions & Answers
How do I change a watch battery in Le Clip Swiss
I contacted the manufacturer. You remove the crown, then use tiny attachment to a bike pump to push air into the interior of the watch. This will cause the crystal and dial to come apart. Viola!
9/22/2022 3:29:00 AM •
Watches
•
Answered
on Sep 22, 2022
Dunhill cigarette lighter spare parts needed
Hi, Dan, I have 2 Dunhill ighters that work but they leak butane. Making them unfit for use. I would like to have them repaired/rebuilt. I believe they are 1960-70's vintage so, the lack of parts will definately be an issue here. Please advise. Thanks Glenn
[email protected]
8/17/2022 12:16:44 AM •
Watches
•
Answered
on Aug 17, 2022
Sector adv 1000 manual
ZERO-SETTING OF THE SECONDS-HAND & SUB-SECOND HAND ON THE SECTOR ADV1000 CHRONOGRAPH.
NOTE: The pusher buttons A, B & C are positioned on the watch at the 2 o'clock (A), 10 o'clock (B) & 8 o'clock positions (C), while the crown is at the 4 o'clock position.
1) Set the crown at the normal (in) position.
2) Push the B button twice.
3) Pull out the crown to the 2nd position (fully out).
a.) Seconds-hand setting: a push of button A moves the 2nd hand by 1 second. Move it until it is at the zero position.
b.) 2/100ths second hand: a push of button B moves the 2/100ths second hand by one 2/100ths second. A continuous push moves it quickly. Move it until it is at the zero position.
4) Push the crown back in to normal position.
QUICK-SET OF THE CALENDAR DATE
With the alarm switch off, pull out the crown halfway to the first "out" position (not fully out). Turn the crown clockwise to quick-set the date.
7/11/2022 8:54:55 PM •
Watches
•
Answered
on Jul 11, 2022
How do you set the time on a kids accutime watch
Try looking between the two buttons on the right. There's a tiny knit-sized button between them that's barely noticable. Ourc watch model is PAW4307ds, but it is likely the same configuration.
7/6/2022 12:32:58 AM •
Watches
•
Answered
on Jul 06, 2022
Turning off beep on skmei 1163 watch
Hold down the alarm button while you are in display time mode, and then while holding down, press date. That should turn off alarm. If you want to turn it back on, then do it again.
6/3/2022 8:45:33 PM •
Watches
•
Answered
on Jun 03, 2022
Not finding what you are looking for?