Top 20
Kenneth Cole KC3500 Wrist Watch Questions & Answers
HOW DO I TAKE A LINK OUT OF THE WATCH BAND
Start by looking at the inside of the watchband, there should be a arrow pointing up/down. Take a pin and put it in on the side that shows the arrow going down. Take a hammer and GENTLY tapp the pin. The pin should push out a pin in the band. Do this as many times as you have to for the size you desire, and then put the pin in the same derection as you tapped the pin out. Usually you will also see a **** on the side youn DON'T want to tap out. If you still; have a problem don;'t hesitate to write me, and I will be glad to take you step by step with this. Good Luck!!
Kenneth Cole KC3500 Chronograph
Pull your time adjustment knob out 2 clicks. hold down the chronograph time reset button and then press the start stop button and it will move to the next second. keep doing it until it is back at the 12 o'clock position.
Broken band
Yeh, just go to a watch repair shop and they will have the pin for your watch. If they don't, they are not a repair shop. Don't go to a jewelry store, they probibly won't have it. Look for a true watch repair shop in the phone book. Pins like that are in stock at any repair shop. Good Luck!!
Watch problem
The rotating number is beneth the dome crystal, you CANNOT repair by yourself, you can send it to 47-50 33rd St.
Geneva watch group
Attn: Tsai
I will help you with this problem.
Thanks
Tsai
How to set time of the Kenneth Cole reaction watch RK5072
They all set pretty much the same. Here is the general walk through from the Cole site:
Press the lower left button on the Kenneth Cole digital watches to cycle through the various modes. Press it three times to get into time mode (the face should be blinking). Press the upper right-hand button to change the seconds. Press the lower right-hand button to select the minutes.
WHAT IS THE BATTERY SIZE FOR A KENNETH COLE KC50477003WATCH?
Tip & How-To about Watches
Changing Watch Batteries
Lots of posters ask "what is the battery in my (name of watch)" with a view to changing it yourself. This is a bad idea for many reasons. You don't have the tools or knowledge to remove a rotary screw on back, or the gasket sealant for a waterproof watch. Some fashion watches have 4 traditional screw and need professional grade jeweler screwdrivers. Also, there are about 20 batteries commonly used in watches, in various sizes and internal technology, Lithium Ion, Silver Oxide and Manganese Alkaline. If you buy them, you generally have to buy 10!
Don't sweat the details. Just take the watch to your local jeweler. They have all the batteries at hand and the tools to remove the back. It is done whilst you wait for $8 to $15!
Posted by ADMIN... on Dec 31, 2018
Not finding what you are looking for?