Top 20
KitchenAid 24 in. KUDI01IL - Multiple Color Free-Standing Dishwasher Questions & Answers
I have a KUD101FL533 Kitchenaid dishwasher. The
Hello, Christi,What i would try first is see if perhaps the ribbon cable has come loose from the control panel the touch pad is separate from the control board and its entirely possible that its bad and not the control panel.Also i would surly want to check to door switch as well since they are more common problem than either the touch pad or control board ..to me its sounds like possibly the door switch is the problem since it thinks the door is open and wont allow it to start since the door switch thinks its open .Please respond if you should need further assistance.GENE
I have a KitchenAid model
sounds like you have a bad or clogged fill vavle,,you have water running to unit but not in unit,,,its still trying to dry dishes as if they wash...most dishwasher are hard wired to breaker and or not grounded,,,but only if you can shut of power pull dishwasher out remove water connection,,see if any **** is blocking vavle use flash lite if present...if so replace it..good luck you can not clean a dishwaser vavle..
My model KUDI01ILBT1 KitchenAid dishwasher, bought
Hello, jean
I was trying to help
you out here. I was going back to some customers that asked questions
in the past and it appeared that no one answered them, so I thought I
would take some of my personal time to see if I can help. Even though
this site may not have your exact model or brand, This link will help
you tons. Here is a link
to about everything you want to know about your dishwasher, from repair
to trouble shooting it,pictures, video's. Just scroll around and you
will see tons of information to almost any question you might have on
your dishwasher. If you go to this link and click around, I am sure you
will find out so much about your dishwasher, you will know more that the
company that made it. Here Is the link for you to click on>>
http://home.howstuffworks.com/dishwasher.htm
Please if this helped you at all, if you can find the time
to rate my help and some kind words written would be appreciated for my
free help , I would appreciate it. Here is also my direct link to my own
pages of other areas of my expertise for other problems you might have
in Automotive,Appliance, and Electronics. Drop In anytime for my help.
Thanks,Mike
http://beta.fixya.com/users/mc1bean
Unit is seven years old,
Give it a good cleaning and if your machine still runs fine why waste on a new one, give it a try.
Regards.
PLZ. rate my suggestion.
Is there a reset button on the dishwasher? if so,
Not sure what type of reset you are after. Is the dishwasher not responding to any panel switches.
Is the keypad locked, i.e., is the control lock light on? Then press Energy Saver Dry button for 4-5 secs.
Are some lights flashing and dishwasher will not start? Have you tried to turn mains power off and back on?
If you think the controller needs a reset, you could try this sequence of keys within 7-8 secs.
hi temp scrub/ energy saver dry/hi tempscrub/ energy saver dry/ hi temp scrub/ energy saver dry.
If the reset sequence has worked correctly, then all lights should light up. Press Cancel to exit from reset mode. I am assuming you have a users manual. If not then download from here.
Please rate the solution if it helps your problem otherwise post a comment
How do you reset the spring on the door? the door
just need to on do the unit from the two screws that hold the top of the dish washer in,,,make sure you have enough hose and power cord to pull the unit out just a little ways,,,but it is always best to unplug the dish washer,,,but the unit needs to be pulled out and the springs just need to be hook back on towards the bottom of the dish washer,,,always work safe,,unplug the dish washer. water and electrical never works together
Cleaning Light flashes 7 times then repeats 7
techbuster
- Rank: Guru
- Rating: 92%, 2877 Votes
- Crack open door
- Within 3 seconds push Hi-Temp Scrub, Heat Dry, Hi-Temp Scrub, Heat Dry
- Close and latch door
- Press Cance
Try the above steps and also check the video in link given below to know detailed explantion on what the light means
http://www.youtube.com/watch?v=Hv7xOaucH7I
Some of the dishes are
Be sure you're not blocking the detergent dispenser with dishes or pots & pans. If blocked, it won't open and the detergent will not dissolve. Put smaller items closer to the dispenser.
My dishwasher heating eliment is not working is
It can be repaired ... FixYa.com is not a repair place ... we do not dispatch repair services.
However, if you would like to post your question in the Local Repair section, feel free to do so. Someone in your area will pick up your question.
Alternatively, there are repair services in your town, I am certain. You can call any of them, including the one that services machines for the store where you bought your device.
Thanks for your question
Leaks at right front corner
Open door and check seal, make sure there is no damage, tears etc. Also check the door edge that meets the seal for damages, make sure the door is operating correctly(hinges ok). Good luck, best regards. .
The dishes are not getting cleaned. The spray arms
The spray arm rotates based on the water pressure coming out of them. If no water pressure, then no rotation. You probably have a clog on the intake hose. You can pull out the dishwasher, tip it forward so you can get to the bottom and then remove the intake hosing to check for debris that might be clogging it. Also check that the arm will spin freely if you spin it by hand, it should.
Let me know what you find.
Benjamin
We understand that your problem is: KitchenAid
It is possible you have an internal fuse blow out on the dishwasher.
See item 6 on page 2 of this
parts list.
But first turn mains off and on again to check if anything happens ( a reset of some sorts).
I have a repair manual for this but not immediately accessible. Will be about 7 hours that I can get back on this.
Not finding what you are looking for?