Kohler Cimarron Comfort Height elongated 1.6 gpf toilet with Class Six tech - Page 7 - Answered Questions & Fixed issues
Toilet not flushing completely
Prelude:
My toilet had the same problem a few times. I managed to clean it out because the pipe is somehow connected to the downstairs drainage pipe in my house. What fixed the toilet clog was going to the source of the problem and pouring extremely powerful hair clog remover chemicals in it (I did have to open all the windows and get the pets as far away as possible and wear a mask). After the specified amount of time waiting, I went to go flush and it worked.
**Answer**:
I would recommend doing the same thing but only if everyone in the house is gone for 1 hour. Also I would air it out by leaving windows open, not first floor doors or windows though. It can be deadly if inhaled for extended periods of time. The more powerful the cleaner, the better the results but the deadlier it can be if inhaled.
Try this.
My second guess is that it may be the plug inside the toilet's tank. You should check to see if it is working properly. Try flushing with the lid off and watch the plug to see if it is working properly.
3/13/2014 10:11:00 PM •
Kohler Home
•
Answered
on Mar 13, 2014
•
332 views
Plastic fitting at main hose tie in leaks
Most hardware stores carry a good variety of fittings. (Plastic, Brass and iron). Just be sure the leak is the fitting and not just the hose connections. Don't forget to turn the water supply off before cutting the lines.
12/29/2013 2:07:11 AM •
Kohler Home
•
Answered
on Dec 29, 2013
•
131 views
Motor on but jets only work sometimes
need more information about what kind of control you are using to turn the tub on/off.does it turn off when you can get it turned on?Rod US Parts Center888-521-6183
5/10/2013 6:59:46 PM •
Kohler Home
•
Answered
on May 10, 2013
•
86 views
How to clean mold from jets on Kohler Spa tub
Mold on your jets can come from a variety of places but due mostly to the bacteria in the tub.There are several kinds of cleaners to use in the meantime once you get your trim clean so you can prevent what you are experiencing.Take the trim off and clean them in your sink. DO NOT put them in the dishwasher as it is too hot and will ruin your trim.Here is a link to our site that has different options for cleaning the pipes and keeping the jets from getting yucky.
Maintenance ProductsRodUS Parts Center888-521-6183
3/4/2013 5:22:56 PM •
Kohler Home
•
Answered
on Mar 04, 2013
•
238 views
Leaking jacuzzi jet
The workings of a bath jet...From the inside of the Bath there is a wall fitting that threads from the inside of the tub into the jet body located on the outside wall of the tub.If the jet is leaking at this point behind the tub then you should take the wall fitting out of the tub and put a small bead of 100% RTV silicone around the flange of the wall fitting and reinstall it.If however, the leak is from the PVC piping going into the jet then you will need to replace the jet.Rod
US Parts Center888-521-6183
2/7/2013 4:53:18 PM •
Kohler Home
•
Answered
on Feb 07, 2013
•
1,001 views
How to clean dirty toilet
Try a pumice stone they work great & can make a toilet bowl look brand new, there with the cleaning supplies in any store.D :)
6/14/2015 6:41:52 PM •
Kohler Home
•
Answered
on Jun 14, 2015
•
287 views
Whirlpool does not turn on. Kohler Model K-1474-V
The chances that is problem you are experiencing is related to the suction cover is extremely remote. The suction assembly doesn't have anything to do with the tub motor operating.The issue is most likely with the motor not working or the air switch in the motor malfunctioning.What does the control look like that you use to turn the pump on/off?Is it an air button or an electronic switch?
1/31/2013 5:41:56 PM •
Kohler Home
•
Answered
on Jan 31, 2013
•
178 views
Stopped toilet
Has anything non soluble gone down toilet. If plunging vigorously doesn't work, you may have to take up toilet to see the bottom part. Does any of the water go out of the bowl. Does it eventually go down on its own.
1/29/2013 4:17:46 AM •
Kohler Home
•
Answered
on Jan 29, 2013
•
116 views
On binweevils when do you get your sws mishion
need to be level 3 then go to that thingy in your nest and go to that door on the left and press mission 1 but you need 1 dosh.How get 1 dosh:got to your nest and press the bincard thingy finally press that stamp thing then you got 1 dosh.from lolo
1/24/2013 5:59:12 PM •
Kohler Home
•
Answered
on Jan 24, 2013
•
548 views
I have a K4632-AA which usually works just fine
Toilets seem to run on their own because the water in the tank is seeping our past the seal that was designed to keep it in the tank inbetween flushes. Commonly called flappers, they go by seals, tank balls discs. etc. The K4632 requires a flat seal from Kohler. The actual part number is 1059291, however Kohler may only sell this as part of a kit by a different number with pieces not truely needed in your circumstance.
You should contact them at 1-800-4KOHLER, navigate the prompts, and talk to a service member. You may have to do some research in your area to find a retail or wholesale business that will order this for you. There are circumstances where, with some parts, Kohler will send the parts free to your doorstep. No promises on this one. I have put a link below that will give you a complete parts explosion for your reference.
http://www.kohlerserviceparts.kohler.com/ServicePartsPage.aspx?DocumentID=28e40a91273141a5b63e28ad7230d6a5&ModelID=e9143848792b4415a62b4e384caeb856
9/6/2012 5:08:03 PM •
Kohler Home
•
Answered
on Sep 06, 2012
•
4,399 views
Not finding what you are looking for?