Jacuzzi BK37959 White Era?? Two-Piece Elongated Toilet BK37 - Page 9 - Answered Questions & Fixed issues
Our jacuzzi tub is 20
if you have a water stain on the ceiling below your tub then you have a water leak. There is no easy solution for this. You must get to the underside of the tub in order to watch the jets when the tub is full of water to isolate the leak and then have it repaired by a plumber.
8/18/2011 2:14:19 AM •
Jacuzzi Home
•
Answered
on Aug 18, 2011
•
639 views
My jacuzzi bath tub makes
Pump was humming, suspect air lock, pump could of burnt out, check power to pump and if it blows fuses then you will need a new pump and don't forget to bleed the pump
8/5/2011 4:52:12 PM •
Jacuzzi Home
•
Answered
on Aug 05, 2011
•
2,565 views
The water in the tank
There are only a coulple of places that the toilet could leak or, overflow and give you this problem. When you replaced the flapper valve, did it have an extra piece of rugger on it? Universal flappers have a round piece on them that are designed to fit over the overflow tube. If you flapper had this piece and you don't have need for it, you need to cut that out, if the flapper "hooks" to the overflow assembly. Leaving that piec on can contort the shape of the flapper and make it so it won't seal. If you are noticing constant movement(slight swirl) in the bowl, make sure the back tank is not constantly overflowing into overflow tube. If this is the case, your water level is too high. You will either need to adjust the water level and/or replace the fill valve. If you can hear the toilet running or leaking, push down on the flapper, if it stops, you have a problem with the flapper and/or the chain adjustment. When you install the flapper, you have ton make sure the chain is long enough to let the flapper fall and seal but, not so long that it can tangle or get between the the flapper and it's seal below it.
6/19/2011 3:40:02 PM •
Jacuzzi Home
•
Answered
on Jun 19, 2011
•
856 views
I need to manual and installation instructions for
Hello - best suggestion would be to get the make / model # and serial # go under google punch this information in, you will find contact #s,that is how we find out a lot of contact information needed.Sorry could not be of more help.
5/19/2011 3:42:15 AM •
Jacuzzi Home
•
Answered
on May 19, 2011
•
128 views
Toilet does not flush clean.
Welcome to the world of 1.6 gallon flush toilets. You have already done everything that can be done to help the problem and no you are not the only people having this problem. This is just the beast!
They have had this problem with these 1.6 flush toilets from the get go and have come out with power flush toilets to fix this but hold on to your wallet. There are some toilets out there that work better without the power flush made buy American Standard and Kohler but they will run you more then the Jacuzzi.
Sorry I wish there was a better answer to this.
3/23/2011 8:48:02 PM •
Jacuzzi Home
•
Answered
on Mar 23, 2011
•
377 views
The toilet bowl never stays full of water? It
I have the same problem with my Toto TS703. When you flush it, it fills the bowl with water to the rim and stops. Within an hour, the water in the bowl is totally empty except for a small puddle. This has been going on for a few days. It was installed 3 years ago and never had a problem with it until now.
5/16/2013 2:58:17 AM •
Jacuzzi Home
•
Answered
on May 16, 2013
•
179 views
Replace the existing gold hardware
There are no easy answers to this. You will need to go out and find the handle you want and the find a seat with matching hinges. Your best place will be a Plumbing supply house that can order matching hardware for you. This will let you pick just what you want and it will all match. I'm sorry but I don't think your local hardware store will do.
3/20/2011 12:17:13 AM •
Jacuzzi Home
•
Answered
on Mar 20, 2011
•
135 views
Tank fills very slow
maybe it's a problem with the water pressure. you should get a plumber or contact the water company
3/8/2011 5:42:32 PM •
Jacuzzi Home
•
Answered
on Mar 08, 2011
•
103 views
My mother has a Jacuzzi
*********** has a Jacuzzi Perfecta.
This came in two models... one with a round bowl, the other with an elongated bowl.
Both of them use the BN30 BN31 tank.
If you have trouble tracking down a gasket, you might try using plumbers' putty.
Be aware, though, that there have been reports of the back of these tanks cracking. Check the tank to ensure that the leakage is coming from the gasketed surface, and not from a crack.
Good luck!
3/3/2011 1:04:17 AM •
Jacuzzi Home
•
Answered
on Mar 03, 2011
•
330 views
Have a espree whirlpool the
It appears that Lowe's is the primary supplier of this type of tub so that would be one place to start with.
Another option is to contact Whitewater who seems to be the manufacturer of the tub and here is a
link for them.
Here is another link for a
spa parts place I found on a search.
I do not endorse any of the suppliers and only provide them as a guide to help you out but you need to use all normal precautions when making a purchase from any supplier of goods or services.
Hope this helps,
Robert
2/28/2011 11:40:54 PM •
Jacuzzi Home
•
Answered
on Feb 28, 2011
•
56 views
I have a Jacuzzi tub and the vacuum switch will
if when you push the air button it will not turn off the pump, it may be the button that is bad on the top of the tub or the air switch located in the motor.
take the pump out and plug it into an outlet. get a straw and blow into the air switch with the pump plugged in still. if it comes on then the button on the top of the tub is bad. if it doesn't come on then the air switch is bad.
2/17/2011 5:58:20 AM •
Jacuzzi Home
•
Answered
on Feb 17, 2011
•
1,528 views
We use our jacuzzi once
the problem is bacteria building up in the water lines once the water
dries. You should be using a jet cleaning product to clean the water
lines out before they dry.
We have several different good
cleaners on our site that all work well at keeping bacteria out of your
water lines.
You can click on the link below and it will show you
what is available.
Jet cleaners
2/17/2011 5:49:44 AM •
Jacuzzi Home
•
Answered
on Feb 17, 2011
•
282 views
There are holes where rats chewed through in the
Zit tubing connects to the underside of the air button to the air switch on the motor. Younshould not need anymore than about 5-6 feet. Available at your local hardware store. Ask for 1/4" hose OD
2/15/2011 5:13:30 AM •
Jacuzzi Home
•
Answered
on Feb 15, 2011
•
120 views
The bath was working, then it stopped. I checked
there are several reasons a pump will not turn on/off.
1. there is no power to the pump - check the circuit breaker up the the point where the pump plugs in.
2. the pump is bad.
3. the air switch in the motor is bad.
4. the button on the tub is bad.
2/13/2011 11:56:04 PM •
Jacuzzi Home
•
Answered
on Feb 13, 2011
•
123 views
Not finding what you are looking for?