10-25-12Copy following link for wiring diagrams for Leviton double switch.http://waterheatertimer.org/How-to-wire-switches.html#doubleOnly 3 wires will connect to switch. Not 4If you blew breaker than you connected Neutral wire to switch.Neutral wire never connects to switch.Identify Hot wire.There is only one Hot wire that carries power to switch box.This wire connects to one side of device ... which side? ... the side where both screws are bonded together. If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7
Circuit analyzer does not show all possible problems, and tester might be defective.Use analyzer on other outlets.Buy another circuit analyzer.Buy a multimeter at local hardware, and test for voltage, and continuity, and compare with known outlet that are functioning correctly.For example outlet may be 240Volt instead of 120V.Copy following links to see typical circuit analyzer and code:http://waterheatertimer.org/images/Typical-circuit-analyzer-15.jpghttp://waterheatertimer.org/images/Outlet-polarity-200.jpg If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7
There is a short, or GFCI outlet is bad.Copy following links for help with GFCI:http://waterheatertimer.org/pdf/GFCI-outlet-will-not-reset.pdfhttp://waterheatertimer.org/How-to-wire-GFCI.html If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7
Copy following link to see illustrations of switch wiring, including combination switch, and 3-way switches, double switches etchttp://waterheatertimer.org/How-to-wire-switches.html If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7