Top 20 Frigidaire FFLE1011MW Electric Washer/Dryer Laundry Center - White Questions & Answers

CHECK MOISTER SENSOR AND OR THERMISTOR. THERMAL CUT OFF AND CYCLING AND HI LIMIT THERMOSTATS

Thank you for your inquiry, friend!

I see that you are having trouble with your Frigidaire washer not starting. This sounds like a possible problem with your control panel or keypad. You may need to disassemble the washer in order to pinpoint the possible problem this is not a simple DIY job. I would recommend seeking assistance from a professional technician for proper diagnosis and repair. This will help you avoid future issues as well as possible multiple part purchases. I hope this information is helpful. -Matt

Sure sounds like your timer has bit the dust. I'm not sure if the timer is still available. You have a great washer there. Good luck.

The machine does not exist as you have written it. There are two likely reasons The door switch has failed and hasn't passed the self test procedure. or the control board / timer has failed. Try power cycling it. Remove the mains plug for an hour. It is has an On Off button press it for a minute. For a knob, full it and leave two minutes. Plug back in and try again. https://www.google.com/search?q=Frigidaire+FWAC+19B5MSGNW ..

crowbar?

There could be several issues that could cause your Frigidaire dryer to stop running after just a few seconds. Here are a few potential problems to consider:

1. Thermal fuse: The thermal fuse is a safety device that shuts off the dryer if it overheats. If the fuse has blown, the dryer will not run.
2. Clogged dryer vent: If the dryer vent is clogged, it can cause the dryer to overheat, which could trip the thermal fuse.
3. Faulty cycling thermostat: The cycling thermostat regulates the dryer's temperature. If it's faulty, the dryer may not run for more than a few seconds.
4. Faulty start switch: If the start switch is faulty, it could prevent the dryer from running.
5. Faulty door switch: The door switch prevents the dryer from running when the door is open. If the switch is faulty, the dryer may not run.

To fix the problem, you'll need to diagnose which of these issues is causing the problem and then replace the faulty part. I recommend having a mechanic diagnose and fix the problem for you.

Maybe try this...... https://yellowfevereats.com/frigidaire-affinity-washer-reset/

Hi, Please power cycle your dryer and attempt to run it again. If this fails, please ensure that your clothes are evenly distributed so that they weight of the clothes doesn't cause the dryer to be shutdown. Just to double check, please ensure that you've cleaned the lint track of your dryer. Lastly, you can use an power outlet extender to help switch the power outlet that you're using to run your dryer as there might be something wrong with your current one. Thank you.

If it is new, didn't it come with an operating manual? Videos here https://www.google.com/search?q=Frigidaire+Gallery+GRFC23534FO+sabbath+mode

How do I set Sabbath mode on my refrigerator? - Frigidaire

https://www.frigidaire.ca > ... > FAQs > Refrigerators Depending on your model, the Sabbath mode is turned ON or OFF by simultaneously pressing and holding for 5 seconds both the:"v" and "+" orThe freezer "-" and ...

On many machines the E11 error occurs as one or more of these connecting wires break, this may be due to excess movement from unbalanced loads. To prevent this when washing any heavy items ensure there are enough heavy items to spread around the drum to help the machine balance its load.

Try power cycling it. Disconnect from the mains supply for 5 minutes and plug back in. Try again. If that doesn't fix it, you need a service call.

https://www.appliancepartspros.com/repair-help/frigidaire-washer-ftf2140es0-repair/ftf2140es0-wont-start.html This may help.

Hi, Please attempts to use oil to help gently open the door . Or you can start the machine and attempt to open the door then. Running the machine might free up the lock somehow. Thank you.

Question edited for clarity. Question moved to Frigidaire. Normally, you have to remove the top of the siphon. Cleaning the tray often doesn't work. Or you can remove the drawer, turn it over and run hot water into the hole until it clears.

Help and videos in the link https://www.google.com/search?q=frigidaire+stackable+washer+not+agitating ..

bad temp sensor

You have the hoses hooked up wrong. Reverse them.

https://video.search.yahoo.com/search/video?fr=mcafee&ei=UTF-8&p=is+lint+in+a+dryer+a+fire+hazzard&type=E211US1494G0#id=2&vid=a999dc7d047af3d527d222986bacfbde&action=click Yes Make sure the screen is clean and the exhaust/exit system is not restricred.

why not call for service they have tools to fix things you do not have and more important skills. why not contact maker Frigidaire dot com and ask for screws. and or prime help in your unstated town. or country.