20 Most Recent Leeson Motor - 3hp, 115/230v, 1740rpm, Dp, Rigid Mount, 1.15 S.F - Page 8 Questions & Answers

Did you ever find one? I need one also

Question edited for clarity and name of maker. 27 ft lbs

Speedaire® Stationary Air Compressors - Campbell Hausfeld

https://www.campbellhausfeld.com > files > manual02 PDF FP070000AV. Torque Specifications. Cylinder head bolt . . . . . . . . . . 27 ft. lb. Cylinder to crankcase bolt . . . . . . 27 ft. lb. Bearing cap bolt .

you need to find out what other name it goes by or match parts here, Items found similar to American Forge Pro 1 5 HP Air Compressor Model No...

copy and paste https://dealers.doosanportablepower.com/emea/documents/Parts/01.%20Portable%20Compressors/3.Large%20Range/9-235%20HA%20stage%202/22364079-03-04-OM+PM-9235HA.pdf

Question edited for clarity and spelling. Question moved from Cars and Trucks category. Google make model wiring diagram We have no clue what you have! ..

It is more likely to be the solenoid than the 'mother board'. Do some tests and you will find out which bit is faulty.

No, because the hose is pressurized the same as the tank. The action happens when you press the trigger in the stapler. See if the internal working need lubrication or new seals.

o-ring seal any hardware store---if gasket buy gasket material and make one

Check the Capacitors and the centrifugal switch inside the motor. If this switch fails the start winding might be on all the time or not switch the start capacitor in when the motor is starting. Either condition will throw an overload error

This is an easy fix.. you need an new safety valve or a new switch. If the safety valve releases pressure before the max pressure replace it. the switch has a cut in pressure of 120 psi (this means compressor will start when pressure falls to 120 psi. The cut off pressure is 150 psi. This means the unit will shut off at 150 psi. You need to watch supply pressure to see if it exceeds 150 psi. If it does replace switch. Safety Valve Part Number:AB-9415379 Pressure Switch Part Number:AB-9415626

Replace wand or take it apart and clean trigger and seat

as it is only a few months old take it back for a warranty repair or refund there should be at least 6 months warranty

you have a bad controller. you can have it replaced or and Atlas Copco tech may be able to program it. If not your only option is to replace the controller.

you can find anything you need at discount prices here>>www.discountbargainprices.com

go google and type in-- manufacturer of central pneumatic framing nailer -- you may be able to leave out the framing word as the company will make more than one unit

I need the plastic air hose with the fittings. i'll really appreciate any help.

GOOGLE IT ONCE

sometimes the nozzle will not press open the shrader valve on the tire air stem

That is exactly what you will get, There are no repair parts. buy oil lubed compressor. be aware that the comp may not deliver enough air at high pressure for task. MCGRAW 21 gallon 175 PSI Oil-Free Vertical Air Compressor CENTRAL PNEUMATIC 29 gallon 2 HP 150 PSI Cast Iron Vertical Air Compressor

maybe a hole/tare in diaphram