20 Most Recent Jacuzzi Nova Whirlpool Tub H532 - Page 6 Questions & Answers

it is possible that the switch is held in place by a nut from underneath see if you put your hand up under the panel to see if there is a nut there

Could be a bad electrical connection or if the pump is running really hot due to being tight , blocked or mechanical failure, it may be overheating and cutting out. When it cools down, it will try to start again. Check that there is no foreign objects stuck in it such as hair, lint etc.

Pull off all three knobs and then the plastic graphic rings and you will find 2 screws under each. After removing the screws the whole plate can pop off. If your problem is anything like mine, your air pump is full of water and needs to be replaced. After removing all the screws you can carefully pry it up with a thin tool, it is most likely caulked to the tub. You can find replacement parts and names for it here: http://www.guillens.com/index.jsp?path=product&part=124772&ds=dept&process=search&text=JAC%20%20G107XXXHope that helps

take the capacitor to a electric motor repair shop along with the details of the electric motor ( hp ,watts. phase current ,amps etc ) and they will be able to match it