American Standard Evolution 2425V-LHO.020 White 5 Feet x - Page 6 - Answered Questions & Fixed issues

Actually sounds like trash in the toliet water valve.....or possible that if teflon tape was used to seal threads has been drapped accross inlet threads and caused blockage......Best way to check this is to take supply line loose from toliet and slowly turn water on while pointing the supply into a bucket or something to catch the water and see if the pressure is ok......Then check valve to see if grit or blockage is in the toliet valve.........Depends on valve design to whether or not you will be able to clean....may have to replace toliet valve with new one......hope this helps

' /* * For text ads, append each ad to the string. */ for(i = 0; i ' + 'Ads by Google' + '' + google_ads[i].line1 + ''; url = '' + google_ads[i].visible_url + ''; info = makeBoldAdWords(google_ads[i].line2) + ' ' + makeBoldAdWords(google_ads[i].line3) + ''; s += url + info; s += ''; } s += ''; } document.write(s); G_GGL_SKIP += google_ads.length; return; } var G_MAX_ADS_WL = 1; google_ad_client = "pub-8183356113384228"; // substitute your client_id (pub-#) google_ad_channel = "4447185069+1147946396"; google_ad_output = 'js'; google_max_num_ads = '1'; google_ad_type = 'text'; google_feedback = 'on'; if(typeof G_GGL_SKIP == 'undefined') { G_GGL_SKIP = 0; } google_skip = G_GGL_SKIP; // --> google_protectAndRun("render_ads.js::google_render_ad", google_handleError, google_render_ad); Problem with the American Standard Bathtubs / Whirlpools By bassassist69 on Sep 02, 2011
Hello: Please contact us at Wmerican Standard Brands and we will gladly help you.
1-800-442-1902
Monday through Friday
8:00 A.M. to 7:30 P.M. EST

Technical Customer Service
Monday through Friday
8:00 A.M. to 6:00 P.M. EST
8:00 A.M. to 3:00 P.M. EST Saturday

-Paul, on behalf of ASB

Improve the quality of material in use

Is it leaking on the floor, or just into the bowl.
You can find replacement parts at any hardware or plumbing store.

There is a rubber gasket between the urinal outlet and the pipe it connects to in the wall. Pull the bolts holding it to the wall and pull it away carefully. If it has been siliconed to the way, you'll have to cut it. Swap out the gaskets. Be careful not to pinch the new gasket. Ask at your local plumbing supply for the gasket of your particular model. They'll know what your talking about.

If the pump hums and does not pump the water then there is a probability that the pump does not pump. Usually when most pumps spoil they still hum and sound like they are functioning fine but in actual fact they have stopped working. First get the pump checked out if it has water supply intact if the supply of water to the pump is okay then the pump might need replacement or fixing as this means the pump is bad.
Usually due to the cost of replacement pumps most people prefer to fix instead of just replacing, get a trusted expert to help you check if the pump is worth repairing or should just be replaced.
Hope this solution has been helpful?
Thank you for visiting FixYa.

hello hans.... here is the link that has the info you seek. http://www.americanstandard-us.com/resources/technicalfiles/default.aspx?sw=high

Joe

I would suggest that you have a electrician check the motor and make sure that the start capacitor is still good and that the switch is ok. It could be that due to lack of use that the motor needs cleaned and oiled. Thank you.

Grab a wire hanger and push it down there wiggle. It alot this. Usually works

Check the fill valve. it may have a bad seal inside or some trash in the water supply (iron or calcium deposits) may have clogged it. Do you hear water running when it's not flushing?

i have the same issue with my aqua option toilet. if you have a water shut off installed on the supply line to the toilet, just close it enough to reduce the supply pressure. no more splashing.

What I would do is just overlay the existing floor with 3/4 inch 6 ply plywood'You would probably be ok without it but this will help to more evenly distribute the load.Thank you.

WTF?!

Not enough information to help you.

i am afraid there isn't a product out there to do that. your best solution is to have a repairman from the factory and repair the tub so it will not leak.

Hi,
Not saying that all of them screw out... but most will just turn right out...spin the top CCW and it will come out...

heatman101

You need to get in the yellow pages and look in the Bathtub section for repairman

It is likely a stanadyne!
It is rebuildable!!
And finally it is right above your block in the center.....

The beautifucl teacher is Mrs. Angel H. Libres.

Regards,

Angel

check the air tubing coming off the back of the motor. that tubing should connect from the air switch on the motor to the bottom of the air button on the top of your tub.
if it is not connected then it will never turn on.