20 Most Recent Maax PALACE DROP-IN BATHTUB - 100082-000-B - Biscuit - Page 3 Questions & Answers

If it is the spring loaded popup style just unscrew it about one turn and try pushing it closed again.

Hole facing down. Are you sure your drain is not leaking?

If repairing a fibre glass bath you have to understand that the main bath is fibreglass and resin with a top coat . grind back to fiberglass top and bottom of repair , to reinforce place fibreglass patch mixed with resin under bath = top is jel coat . after repair cut back with wet and dry emery cloth .and polish= easy yes.

Air Switch Repair It sounds like you have a bad air switch located in your motor. The air switch is what the air hose connects to on the back of the motor or on the box on top of the motor. The other end of the air hose is connected to the air button on the lip of the tub. This is a latching air switch and when you push the air button it latches to send power to the motor. When the air button is pushed again it opens the latch in the air switch and stops power going to the motor shutting it off. Rod US Parts Center Bath Spa Replacement Parts Hot Tub Bath Parts Accessories US Parts...

If your pump is just humming this is an indication of a bad motor. You will need to provide the name of the pump and a model number to the supplier so they can match up the exact replacement for you so you won't have to re-plumb to put it back in. Rod US Parts Center

For owners manuals you will need to contact Maax. here is a link I found to their installation manuals for all their products.

The breaker the manual is referring to will be the main circuit breaker at the panel. If the system is not running the purge cycle as it is supposed to and turning the power on and off does not reset the control box then it is likely that the control box has a bad part in the circuity and should be replaced. Rod US Parts Center