For a complete manual visit my tips and tricks page.
The time is under: Settings>Watch
To access settings push either of the right side buttons from the main default screen
Push the red button
use the right buttons again to scroll to watch
Push the red button
Right buttons again to choose time
Push red button
The Right side buttons scroll through choices, the red button is your chooser/ confirmation button. The left side bottom button will return you to a previous screen.
All other settings can be changed in the same way.
Step 1: Remove the old battery so you can find a replacement. Somewhere should sell you the battery alone, even if they won't do the replacement for you.
Step 2: If you're not going to use this in a wet environment just put the new battery in and don't worry about the seals. Just be careful when you clean it. For example, use a damp cloth but don't immerse it.
Step 2b: If you really want to seal it get some silicon seal from a hardware store or maybe an outdoor store. Line the edge of the battery compartment where the cover meets the compartment and replace the cover. Let it set and you should be good.
Fixya
https://www.fixya.com > Forum > Tags > jkexer e1
...jkexer polar 5090 treadmill and its coming up E1 any ideas please 1) You must adjut the speed sensor, clean it, tight the connector very well.see the ...
images
..