20 Most Recent Whirlpool 5' Jacuzzi Tub Bathtub Cetra 532 H525-969 - Page 8 Questions & Answers

There is a blue cap on the body of the white pressurized water tank. Twisting off the blue cap, you will see a air nozzle - similar as those on the tire. You need to pressurized the tank to 60 PSI. I spend hours to figure out this solution on my own system.

most likely there is a switch that is burned out. on the lid there is a peg and that peg goes down in the hole and triggers the switch to let the machine know the lid is closed. romove the front panel (should just pull off) this will expose screws to remove top. switch will probably have burn marks on it. replace it.

• Check the circuit breaker to make sure the power is on at the controls.
• Check power coming out of the control going to the air blower

If there is no power coming out of the control when it should be then you have a bad control box.

Rod Kidman

US Parts Center

We locate the "seemingly" impossible...

Ph: 888-521-6183

Fax: 801-417-8027

"Chat Live"

That control and the pump are no longer made. That system is very old.What brand of pump do you have? If you can get me that information I will be able to find a solution for you.Rodwww.uspartscenter.com

I had the same issue after mine was installed. The line to the jet in the back was crimped a little and when the crimp was taken out, it works just fine. The line that was installed was a little to small and it did not have room to fully expand. You might check this out and I hope that it is the same as mine. Easy cheep fix buy just getting a little bigger line.

Fill tub and toss in a dishwasher tablet with a little bleach. Run Pump and jets

If its on a GFCI circuit reset switch.Air button activation - check for loose air tube connections or bad air button.Electronic control - contact a spa technician for diagnostics. If the error is not electricity to the pump or the button(s) controlling the pump - it is likely a bad pump.