American Standard 2770.018w.020 Cadet Whirlpool White - Page 6 - Answered Questions & Fixed issues

Check the aerators for debris. Aerators are located at the end of the spout where the water comes out. Usually these unscrew counterclockwise (some models require a tool). Rinse out and reinstall. They may be just a lower flow model.

I haven't sat on your toilet, so the rockin' don't come from me! Our grandpa had a habit of slamming his a@@ down on the toilet here at my house, so now it rocks when sat on. The bolts have shifted, or the wax ring was smisshed. If you take off the toilet from the floor, and find out either/or, let me know.

I seen two tpyes one where the inter jet unscrew and the other where the outter ring unscrews not sure what kind you have . Went to the pool store and they had a cleaner you add to the water and then run the unit for about 20 minutes then drain . It seem to work pretty good and there was less hassel taking the jets apart

0If you mean first, it is tenths. (or .7)

I have one. Call me at 510 559 0623.

Configure

Hi delen zxi...
Replace your flapper valve as it is faulty and causing your leakage and refilling problem...
See the following YouTube video to explain how to install a new flapper vave..
Please take time to rate me thumbs up

http://www.askthebuilder.com/Toilet_Flapper_Valve_Video.shtml

There is a plastic cap that you need to flip open. You can do this by prying the flap at the top of the hinge. Once you pop it open you will need a screw driver to turn the screw that is inside/underneath the hinges. Turn the screw clockwise until it is good and snug. then snap the hinge cap back into place by applying pressure to it.

Actually sounds like trash in the toliet water valve.....or possible that if teflon tape was used to seal threads has been drapped accross inlet threads and caused blockage......Best way to check this is to take supply line loose from toliet and slowly turn water on while pointing the supply into a bucket or something to catch the water and see if the pressure is ok......Then check valve to see if grit or blockage is in the toliet valve.........Depends on valve design to whether or not you will be able to clean....may have to replace toliet valve with new one......hope this helps

' /* * For text ads, append each ad to the string. */ for(i = 0; i ' + 'Ads by Google' + '' + google_ads[i].line1 + ''; url = '' + google_ads[i].visible_url + ''; info = makeBoldAdWords(google_ads[i].line2) + ' ' + makeBoldAdWords(google_ads[i].line3) + ''; s += url + info; s += ''; } s += ''; } document.write(s); G_GGL_SKIP += google_ads.length; return; } var G_MAX_ADS_WL = 1; google_ad_client = "pub-8183356113384228"; // substitute your client_id (pub-#) google_ad_channel = "4447185069+1147946396"; google_ad_output = 'js'; google_max_num_ads = '1'; google_ad_type = 'text'; google_feedback = 'on'; if(typeof G_GGL_SKIP == 'undefined') { G_GGL_SKIP = 0; } google_skip = G_GGL_SKIP; // --> google_protectAndRun("render_ads.js::google_render_ad", google_handleError, google_render_ad); Problem with the American Standard Bathtubs / Whirlpools By bassassist69 on Sep 02, 2011
Hello: Please contact us at Wmerican Standard Brands and we will gladly help you.
1-800-442-1902
Monday through Friday
8:00 A.M. to 7:30 P.M. EST

Technical Customer Service
Monday through Friday
8:00 A.M. to 6:00 P.M. EST
8:00 A.M. to 3:00 P.M. EST Saturday

-Paul, on behalf of ASB

Improve the quality of material in use

Is it leaking on the floor, or just into the bowl.
You can find replacement parts at any hardware or plumbing store.

There is a rubber gasket between the urinal outlet and the pipe it connects to in the wall. Pull the bolts holding it to the wall and pull it away carefully. If it has been siliconed to the way, you'll have to cut it. Swap out the gaskets. Be careful not to pinch the new gasket. Ask at your local plumbing supply for the gasket of your particular model. They'll know what your talking about.

If the pump hums and does not pump the water then there is a probability that the pump does not pump. Usually when most pumps spoil they still hum and sound like they are functioning fine but in actual fact they have stopped working. First get the pump checked out if it has water supply intact if the supply of water to the pump is okay then the pump might need replacement or fixing as this means the pump is bad.
Usually due to the cost of replacement pumps most people prefer to fix instead of just replacing, get a trusted expert to help you check if the pump is worth repairing or should just be replaced.
Hope this solution has been helpful?
Thank you for visiting FixYa.

hello hans.... here is the link that has the info you seek. http://www.americanstandard-us.com/resources/technicalfiles/default.aspx?sw=high

Joe

I would suggest that you have a electrician check the motor and make sure that the start capacitor is still good and that the switch is ok. It could be that due to lack of use that the motor needs cleaned and oiled. Thank you.

Grab a wire hanger and push it down there wiggle. It alot this. Usually works

Check the fill valve. it may have a bad seal inside or some trash in the water supply (iron or calcium deposits) may have clogged it. Do you hear water running when it's not flushing?

i have the same issue with my aqua option toilet. if you have a water shut off installed on the supply line to the toilet, just close it enough to reduce the supply pressure. no more splashing.

What I would do is just overlay the existing floor with 3/4 inch 6 ply plywood'You would probably be ok without it but this will help to more evenly distribute the load.Thank you.