20 Most Recent Canon imageCLASS MF4770n Black/White Laser Multifunction - Page 6 Questions & Answers

Error code 171,0,0 on the Canon 5600F scanner indicates a communication error between the scanner and the computer. Here are a few troubleshooting steps you can try:

1. Check the cable connection between the scanner and the computer. Make sure that the USB cable is securely plugged in on both ends and that there are no visible signs of damage.
2. Try a different USB port on the computer. Sometimes, the USB port that the scanner is plugged into can be the issue.
3. Make sure that the scanner driver is installed and up-to-date. You can check for driver updates on the Canon website.
4. Uninstall and reinstall the scanner driver. This can sometimes fix communication issues.
5. Try scanning film with a different scanning software. There may be an issue with the software you are using.

If none of these steps work, it's possible that there may be a hardware issue with the scanner. In this case, you may need to contact Canon support for further assistance.

The steady light from the alarm and power indicators on your Canon MP258 printer could indicate a hardware issue. You mentioned that you already tried resetting the printer, but it did not work. In this case, it may be best to have the printer checked by a professional technician or bring it to a Canon service center for repair. It's possible that there could be a problem with the power supply, logic board, or other components that need to be replaced or repaired.

It sounds like you have already tried a few steps to address the issue. Here are a few more things you can try:

1. Turn off the printer, unplug it from the power source, wait a few minutes, and then plug it back in and turn it on.
2. Check to make sure the printer is not in an error state. If it is, clear the error and try printing again.
3. Try cleaning the print head manually. To do this, remove the print head and use a soft, lint-free cloth to clean it. You can also use a cleaning solution designed specifically for print heads.
4. Check the ink cartridges to make sure they are installed correctly and have enough ink. If they are low or empty, replace them.

If none of these steps work, it may be best to contact Canon support for further assistance. They may be able to provide additional troubleshooting steps or offer a repair service for your printer.

good ^ ^

There could be several reasons why the Canon XA10 camera is not powering on when the power button is pressed. Here are some steps you can take to troubleshoot the issue:

1. Check the battery: Make sure the battery is charged and properly inserted into the camera. If the battery is low or dead, the camera may not turn on.
2. Check the power adapter: If you are using the AC adapter, make sure it is properly plugged into the camera and the power outlet.
3. Try a different battery or power adapter: If you have another battery or power adapter, try using it to see if the camera powers on. If it does, the original battery or adapter may be faulty.
4. Reset the camera: Remove the battery and memory card from the camera, then press and hold the power button for at least 30 seconds. Reinsert the battery and memory card, then try turning on the camera again.
5. Contact Canon customer support: If none of the above steps work, the issue may be with the camera's internal components. Contact Canon customer support for further assistance.

If your Canon ir2016 is experiencing a paper jam in the fixing unit when printing or copying back-to-back, here are some steps you can take to try and resolve the issue:

1. Turn off the printer and unplug it from the power source.
2. Open the front cover and remove any visible paper jammed in the printer.
3. Check the paper tray to ensure the paper is loaded correctly and not exceeding the maximum paper capacity.
4. Check the paper path for any debris or torn paper that could be causing the paper to jam.
5. If you find any debris, clean the printer thoroughly with a soft, dry cloth.
6. Check the fixing unit for any damage or obstruction.
7. If you are still experiencing a paper jam after taking these steps, it may be necessary to contact a technician for repair.

It is important to avoid forcing the paper out of the printer, as this can cause further damage to the printer. Additionally, be sure to only use the recommended paper types and sizes for your printer to avoid paper jams.

If the inner finisher on your Canon IR-2535 doesn't return to the home position at times and there are no error codes displayed, there are a few potential causes and troubleshooting steps you can try:

1. Check for any obstructions: The inner finisher may be blocked by a paper jam, debris or foreign objects. Check the finisher carefully and remove any obstructions.
2. Check the finisher sensors: The finisher has sensors that detect the position of the finishing unit. If these sensors are dirty or blocked, they may not function correctly. Try cleaning the sensors with a dry cloth.
3. Check the finisher motor: The inner finisher is powered by a motor that moves it into position. If the motor is not working correctly, it may cause the finisher to malfunction. You can try checking the motor and replacing it if necessary.
4. Check the finisher control board: The finisher also has a control board that may malfunction and cause the finisher to stop working correctly. If none of the other troubleshooting steps work, you can try replacing the control board.

It is important to note that opening and working on the inner finisher can be dangerous, so if you are not experienced in working on office equipment, it may be best to call a professional for assistance.

Check to see if a ribbon cable is incompletely plugged in. https://support.usa.canon.com/kb/index?page=content&id=ART111409 https://www.copytechnet.com/forums/canon/152879-e000733-0000-canon-ir-adv-c2230.html

Canon ir 6000 error code : e245-002

The E000202-00010 error code on your Canon IR C3226i typically indicates an issue with the Fixing Assembly Unit. You may need to replace the Fixing Assembly Unit in order to resolve this issue. Alternatively, if you are comfortable performing advanced troubleshooting with your machine, you can check the Fixing Relay PCB and check for any loose electrical connections.

Question edited for clarity.

Canon iPF5000 - Error Code: 03800500-2F30 - Printcopy.info

https://printcopy.info > code=03800500-2F30 Code: 03800500-2F30; Description: Head management sensor error. The head management sensor detected a ink discharge error. A sensor sensitivity error was ...

Error Code IPF8000 Error 03800500-2F30 - Copytechnet

https://www.copytechnet.com > ... > Canon Mar 1, 2013 - Hi My IPF8000 showing 03800500-2F30 error code. I am using this printer since 2008. Pretty familiar with the machine inside and out. Canon iPF-710 error 03800500-2F30 - Copytechnet Jul 20, 2020 Canon imageProGRAF IPF770 Nozzle POS Check Fail 2F30 ... May 2, 2018 Canon IPF 8100 errors - Copytechnet May 23, 2017 Canon IPF 8000 wasting ink and error - Copytechnet Jun 21, 2012 More results from www.copytechnet.com

Once you get the warnings you will normally get lots more prints before it actually runs out. Printer Properties will tell you the Ink levels. I used to use exclusively Can original cartridges, but fed up of paying the exorbitant prices, I bought two full sets of cartridges off amazon, 14 cartridges in total for $32. They are working great.

Perform a hard reset of printer electronics to factory defaults and/or reinstall the driver. If still bogus contact Canon tech services but you may need a new printer. if nothing works.

404 error = question has been deleted [ problem has existed with question or was spammed ]

The E000073-0001 error code on the Canon ImagePRESS C1 photocopier is related to a problem with the temperature sensor in the fuser unit. Here are some steps you can take to try to resolve this issue:

1. Turn off the copier and unplug it from the power source. Allow it to cool down for a few minutes.
2. Check the fuser unit for any visible signs of damage, such as wear or burn marks.
3. Check the temperature sensor and its wiring for any signs of damage, such as frayed wires or broken connections.
4. Reconnect any loose or disconnected wiring and ensure that the fuser unit is properly seated and connected.
5. Power on the copier and see if the error code has cleared. If it hasn't, you may need to replace the fuser unit or the temperature sensor.

If you are not comfortable performing these steps or if the error code persists after attempting to troubleshoot the issue, it is recommended that you contact a professional technician or service provider who is experienced in repairing Canon photocopiers. They will be able to diagnose and fix the problem.

Error code 744-3030 on a Canon IR 4570 indicates a problem with the toner hopper. Here are some steps you can take to try to resolve the issue:

1. Turn off the printer: Turn off the printer and unplug it from the power source. Wait for a few minutes and then plug it back in and turn it on.
2. Check the toner: Open the toner hopper and check to make sure there is toner inside. If the toner is low, refill it.
3. Check the toner hopper motor: The toner hopper motor may be malfunctioning, causing the error code. Check the motor to see if it is working properly. If it is not, it may need to be replaced.
4. Check the toner hopper sensor: The toner hopper sensor may be dirty or malfunctioning, causing the error code. Clean the sensor and make sure it is working properly. If it is not, it may need to be replaced.
5. Reset the printer: Reset the printer to clear any error codes. To do this, turn off the printer, press and hold the "1" and "9" buttons, and turn the printer back on. Release the buttons when the display shows "Initializing."

If the above steps do not resolve the issue, it may be necessary to contact a professional technician or Canon support for further assistance. They can help diagnose and fix the problem safely and effectively

It sounds like you may be experiencing a mechanical issue with the Canon Imageprograf Pro-2100. The error code EC1C-2036 is related to the lower drive nipe arm unit, which is responsible for moving the different components of the printer in order to produce prints. This error can be caused by foreign objects becoming stuck in the unit, or by the unit itself becoming worn out or damaged. To resolve the issue, you will need to first inspect the unit for any foreign objects, and if none are found, then you will need to replace the unit. If you are unable to locate the part or don't feel comfortable attempting a repair, then it is recommended that you contact a professional for assistance.

The best way to reset your Canon printer is to find and hold the reset button on your printer. This usually consists of a small pinhole or recessed button located on the back or side of the printer, depending on the model. Press and hold the button for a few seconds until the printer resets itself.

Error code CANON iR4570/ iR3570 / iR2870 / iR2270 ' Tjah Semrawut Blog (wordpress.com)

errore SC544