Rotel New Original RR927 Remote Control - Answered Questions & Fixed issues


try new battiers in the remote.

Rotel New... | Answered on Mar 12, 2013 | 87 views


Hello Fayeshep,

They are indeed beautiful machines...!!

I looked for service and customer contact

See the top & bottom of the ROTEC AU page (below)

Good luck & happy hunting...

Rotel Australia Home Theater Hi Fi and Custom Installation

Rotel Televison... | Answered on May 20, 2017 | 139 views


Have you tried checking the source/input? On the remote push the source or input button and try changing your source- hdmi 1, hdmi 2, wherever you have your cables hooked up, and make sure that particular source is powered up. On the tv's we've had, the outside antenna source is either called "video" or "tv". A quick clue would be if you push the input button and the little menu doesn't even appear. I'd say the screen is dead!

Televison &... | Answered 11 minutes ago | 20 views


you should find them in the link
https://salus-controls.com/uk/downloads

Televison &... | Answered 3 hours ago | 18 views


The x or y sustain board is on it's way out.

Televison &... | Answered 3 hours ago | 15 views


There are a couple ways to go about changing your region on your DVD player. First is this program:
DVD Region+CSS Free - Watch & Copy Any DVD!
US$ 39.95


dvd-region-free-b.gif Tell Friend
DVD Region+CSS Free enables you to watch and copy any region-coded/CSS-encrypted DVD movies on any DVD drive! It fully supports region-protected (RPC2) DVD drives, and does not require any firmware modifications. It will even work if you have used up your region counter and can no longer change the DVD drive's region.

DVD Region+CSS Free works automatically in the background to make a DVD appear region code free and unprotected to any DVD player and DVD copy software. With the help of DVD Region+CSS Free, you can watch any region coded DVD movies with a software DVD player like PowerDVD or WinDVD! With DVD Region+CSS Free's help, DVD copy software (such as DVDFab, DVD X Copy, InterVideo DVD Copy, etc.) is able to copy DVD's which are CSS protected!

New Feature: DVD Region+CSS Free decrypts not just DVD's, it now allows you also to play, copy and rip protected Audio CD's!
Download DVD Region+CSS Free


SECONDLY, You can enter a code on the player that will set it to a certain region. You can find your code at this website: http://www.dvdcodes.net
If it is not on this list, you can also try this site for more codes: http://www.dvd.reviewer.co.uk/info/multiregion/hackable.asp

This site will give you instructions on how to enter the hack code depending on your brand name player: http://www.dvd365.net/?hacks/pacific.htm

Televison &... | Answered 7 hours ago | 881 views


depending on what make and model you have, you shoiuld have buttons on the front, or touch sensors on the front. touch sensors arent easily visible, but are there, some models react to how close you get to the front panel.

Televison &... | Answered 7 hours ago | 27 views


You need to input a sequence of remote control presses to access a service menu to change the region code.......the sequence will be determined by the make and model of the player!

Televison &... | Answered 9 hours ago | 110 views


The applicable code would be found in a compatible remote control.

Televison &... | Answered 9 hours ago | 14 views


Hello Kelevi, indicate the brand, model and type of equipment you are commenting on, in order to find the best possible solution
I wait your answer
Greetings Franco Dosil

Hola Kelevi, indica marca, modelo y tipo de equipo del que estas comentando, para poder encontrar la mejor soluci?n posible
Espero tu respuesta
Saludos Franco Dosil

Televison &... | Answered 14 hours ago | 17 views


https://www.foxtel.com.au/support/tv/troubleshooting/interactive-troubleshooting/iq3-error-messages/satellite-signal.html

Possibly cable came loose and needs to be tightened.

Other suggestion is to press and hold the power button on the box for 10 seconds, and wait about 3 minutes for it to turn on again and see if that fixes it.

Televison &... | Answered 15 hours ago | 23 views


Hope it may help you,
"Without a remote, accessing your TV's menu and programming the channels are more difficult. Sit down in front of your TV and find the "menu" button. It may be immediately visible or hiding behind a flip-down panel. Press it, and the onscreen menu will appear. Use the channel or volume buttons to navigate to the programming menu. The "enter" button is one of the other panel buttons. Experiment until you find the correct one. Due to variances in TV menu systems, the programming feature may be located in difference places, so browse the menu to familiarize yourself with it. Once familiar with the menu, change your source to either "cable" or "antenna" depending on which service you use. Begin the channel programming and wait for it to finish. Once it's programmed, your TV will now automatically skip to channels that are available to you when you change channels." By Aaron Wardell

Televison &... | Answered 18 hours ago | 14 views


First Available On March 29, 2015 ,

Televison &... | Answered 18 hours ago | 20 views


Hello Liza's, if you do not have the remote control to control your DVD, from the front of your Sony, you can turn it on, open and close the DVD carriage, put it in Play and Stop it, nothing more
With almost any universal remote, you can manage the Sony DVD
I hope you serve my suggestion
Greetings Franco Dosil

Hola Liza's, si no tienes el control remoto para controlar tu DVD, desde el frente de tu Sony, puedes encenderlo, abrir y cerrar el carro porta DVD, ponerlo en Play y Pararlo, nada mas
Con casi cualquier remoto universal, podr?s manejar el DVD Sony
Espero te sirva mi sugerencia
Saludos Franco Dosil
https://www.sony.com/electronics/support/res/manuals/4447/d1526642f56f7d2c942c4598ea9add71/44474743M.pdf

Televison &... | Answered 20 hours ago | 24 views


Hello Ronald, I understand that you can change everything from the TV, but not from the remote control, if so, check the batteries and the battery contact
You can do a test to know if your remote control is broadcasting
Take your cell phone, put it in camera position and point the emitter LED of the remote control to the camera, if you notice that it emits a light, then the control would be wrong, if it does not emit, without touching any key, the remote would be fine, if it is So, then the problem would be on TV
I sent you the link, so you can download the user manual
If with all these tests, you remain the same, I suggest you look for a specialized technical service
I hope you can solve the problem
Greetings Franco Dosil

Hola Ronald, entiendo que puedes cambiar todo desde el televisor, pero no desde el control remoto, si es asi, comprueba las pilas y el contacto de las pilas
Puedes hacer una prueba para saber si tu control remoto esta emitiendo
Toma tu celular, ponlo en posicion de camara y apunta el Led emisor del control remoto hacia la camara, si notas que emite una luz , entonces estaria mal el control, si no emite, sin tocar ninguna tecla, el remoto estaria bien,si es asi, entonces el problema estaria en el TV
Te envio el link, para que puedas descargar el manual de usuario
Si con todas estas pruebas, sigues igual, te sugiero que busques un servicio tecnico especializado
Espero puedas resolver el problema
Saludos Franco Dosil
http://westinghouseelectronics.com/wp-content/uploads/2015/05/WD32HT1360_UM.pdf

Televison &... | Answered 21 hours ago | 18 views


Hi Marcia, indicate the brand and model of the TV you are commenting on, in order to find the best possible solution
Yes, you have to have an area of controls on the TV, there should be the control on and off.
If you need to turn it off imperatively, simply unplug it from the power outlet.
I wait your answer
Greetings Franco Dosil

Hola Marcia, indica marca y modelo del TV del que estas comentando, para poder encontrar la mejor soluci?n posible
Si, tienes que tener en el televisor un ?rea de controles, ahi deber?a estar el control de encendido y apagado
Si necesitas apagarlo imperiosamente, simplemente desenchufarlo del toma de corriente
Espero tu respuesta
Saludos Franco Dosil

Televison &... | Answered 21 hours ago | 17 views


Contact Telefunken directly to request the diagram.

Televison &... | Answered 22 hours ago | 20 views


Hello Celia, indicate brand and model of what you are commenting, to find the best possible solution
For what you comment, on the vertical lines and that every time it becomes wider, I regret to tell you that it is very possible that this is failing one or two plates that are very difficult to change, at the risk of rendering the TV unusable or leaving it in worse conditions.
Consult a specialized technical service
I wait your answer
Greetings Franco Dosil

Hola Celia, indica marca y modelo de lo que estas comentando, para poder encontrar la mejor soluci?n posible
Por lo que comentas, sobre las lineas verticales y que cada vez se hace mas ancho, lamento decirte que es muy posible que este fallando una o dos placas que son muy dif?ciles de cambiar, a riesgo de inutilizar el televisor o dejarlo en peores condiciones
Consulta a un servicio t?cnico especializado
Espero tu respuesta
Saludos Franco Dosil

Televison &... | Answered Yesterday | 17 views

Not finding what you are looking for?
Rotel New Original RR927 Remote Control Logo

3 questions posted

Ask a Question

Usually answered in minutes!

Top Rotel Televison & Video Experts

Raj Patel

Level 3 Expert

1036 Answers

deton8 von Splosion

Level 3 Expert

3310 Answers

Tom Chichester

Level 3 Expert

51970 Answers

Are you a Rotel Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...