Top 20
Rotel New Original RSX1058 Remote Control - Page 3 Questions & Answers
Is there any other way to charge my onn portable dvd player
You don't have to rely only on the original charger for your onn portable DVD player. You can charge it using other methods: * **Power bank:** Charge your player while you're out and about using a portable power bank. * **Car charger:** Keep your player powered even on long road trips with a car charger. * **Universal AC adapter:** Plug your player into a wall outlet with a universal AC adapter that's compatible with your device. These options give you flexibility and convenience, allowing you to charge your portable DVD player in different settings.
Viano model STV55UHD4K went black screen on free to air tv, no pic or sound. displays invalid service. EPG works, tried retuning dtv still no pic or sound but radio stations(abc, jj, etc) work
OTA singals are digital now there are no longer analog signals thus you need a strong enough antenna specailly if you live to far away from the tranasponder. Please make sure you have a adaquate Antenna Walmart, Best Buy and even Amazon has them for cheap.Make sure that you have in plugged in the Coaxe side and that you are scanning using the antenna selection and not the cable selection. Should you have a good enough antenna power cycling the TV does nothing you may need a part for the TV called a tuner board.
www.partstore.com should have the part. I would recommend if you do go this route that you seek a professional if your uncomfertable doing it yourself.The manufacture specially if its out of warrenty will not help in this matter so just telling you to power cycle or go to the manufacture is not the best answer.So to recap make sure you using a good antenna amplified ones are good roof ones are better. Make sure you have a good antenna because range is key also Line of site is also a key factor. I recommend roof top antenna over others because of signal issues. Should you absolutly require a indoor one the flat antennas I find are the best option. You can pick up one fore $20 bucks or so. The more money the better quality you get.Please also keep in mind and search out via zip code the location of your broadcast stations check out this website you will like it
https://www.antennasdirect.com/transmitter-locator.html.Thank you for using fixya.com
Why when i turn on my tv is the picture pink and negative like?
Potential causes and solutions:
High Contrast Mode:
Some TVs have a high contrast mode that can inadvertently cause the picture to appear negative or distorted.
Try this: Hold down the volume button on your Samsung TV remote and navigate to the settings related to contrast. Turn off the high contrast mode, and see if that resolves the issue.
HDMI Connection Issues:
A loose or faulty HDMI connection between your TV and an external device (such as a cable box, gaming console, or streaming device) can lead to color abnormalities.
Check the HDMI cable for damage and ensure it is securely plugged in. If necessary, try a different HDMI cable.
Additionally, an HDMI handshake failure during setup can cause color problems. Restarting both the TV and the connected device might help.
Picture Mode Settings:
Sometimes, the picture mode on your TV affects color accuracy. Modes like "Vivid" or "Dynamic" may exaggerate colors.
Switch to a more standard mode like "Standard" or "Cinema" to see if the pink tint disappears.
T-Con Board Issues (Specific to Some TVs):
If you have a Samsung TV, a polluted T-Con flat cable could be the culprit.
To address this, clean the contacts on the T-Con board using isopropyl alcohol. First, remove any dust. If unsure, consider seeking professional assistance
Why does my show green light then red light the whole time when i switched it on
It indicates that the TV is not receiving enough power to operate normally.
- The power cord or outlet might be faulty or loose. Try plugging the TV into a different outlet or using a different power cord. Make sure the cord is firmly connected to the TV and the outlet.
- The TV might have a blown fuse or capacitor. This would require opening the TV and replacing the damaged component. This is a risky and complicated procedure that should only be done by a qualified technician. Do not attempt to do this yourself unless you have the necessary skills and tools.
- The TV might have a software glitch. Try resetting the TV to its factory settings by following these steps:
- Turn off the TV and unplug it from the power source.
- Press and hold the power button on the TV for 10 seconds.
- Plug the TV back in and turn it on.
- If the TV shows a menu, select the option to restore factory settings. If the TV does not show a menu, repeat steps 1-3 until it does.
Not finding what you are looking for?