20 Most Recent Rotel New Original RR-1060 Remote Control - Page 7 Questions & Answers


The Roku HDCP error code 020 is caused when the Roku player is not authorized to play certain content on your TV. This compatibility issue mainly occurs when you have faulty cables or an older TV. Whichever is the case, you need to troubleshoot the problem accordingly and then, start streaming content seamlessly on your Roku. For help on this Go Roku HDCP error, visit our website https://www.go-roku-com-hdcp.com/ right away or do give us a ring at our toll-free support number +1-844-576-1390 which is open 24/7
roku-hdcp-error-020-o3im5njoakbqdqyqrh2wzsei-2-0.jpg

Televison &... | Answered on May 18, 2019


go to the Menu and you should find it.

Televison &... | Answered on May 18, 2019


There is a small spring in the VCR that helps open the door. When the tape comes up on the track it pushes on the spring. Sometimes they fall off. Or the tab that it leans on breaks off. In this case you can attempt to glue it back on but most likely it will fall off again. The door can come off if you need it to. You will have to take the cover off to do this. This will have no affect on using the VCR. It will still continue to work fine. If removed. This will help you get your tape back each time. I hope that this was helpful in some way.

Televison &... | Answered on May 18, 2019


My tv has same problem. Sanyo - model: CE32LC81-B (very old)
5_18_2019_5_21_10_pm.jpg

Televison &... | Answered on May 18, 2019


Usually there is a hold in the front that you can push in a paper clip to get it opened.

Televison &... | Answered on May 18, 2019


probably a place in the Menu to do that.

Televison &... | Answered on May 18, 2019


Sound more like to me that the power supply is going. Still a cheap fix. The board in the back has to be replaced. I am assuming that the TV is black for a few minutes before you see light on the screen. This would indicate that the backlight is not able to come to full brightness until the transformer has fully powered up. And that transformer is located on the power supply board. It should be about $45 to $65 for the board. It all just plugs in and a few screws. Minus the screws to the back of the TV. I hope that I was able to be of a help to you so you can keep the TV. It is worth fixing. Note that you can get parts for them and most other Tv's via the company that makes them.

Televison &... | Answered on May 18, 2019


More info what's the make and model?

Televison &... | Answered on May 18, 2019


You can't. You can only pick one zone.

Televison &... | Answered on May 18, 2019


Most likely it a stuck volume button. More info would be nice like make and model of TV.

Televison &... | Answered on May 18, 2019


exit it with remote.

Televison &... | Answered on May 18, 2019

Not finding what you are looking for?
Rotel New Original RR-1060 Remote Control Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top Rotel Televison & Video Experts

Raj Patel

Level 3 Expert

1036 Answers

deton8 von Splosion

Level 3 Expert

3310 Answers

Tom Chichester

Level 3 Expert

51898 Answers

Are you a Rotel Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Rotel Televison & Video

  • Rotel Televison & Video

Most Popular Question

rotel rbk d8100 power light blinking

  • Televison & Video
Loading...