20 Most Recent Rotel New Original RR-1060 Remote Control - Page 4 Questions & Answers


Follow the instructions provided on your unit and it will proceed to locate all channels it is capable of receiving (assuming you're connected to an antenna) and when the scan is finished it will show you its results.

Televison &... | Answered 2 days ago


What brand is your TV? The Chromecast should not affect any TV input, unless the ATV and the HDMI2 port are shared. Try to attach the Chromecast to a different HDMI port. Rememner to supply USB power for it, by a separate USB power supply, or use a USB to MicroUSB cable attached to one of the TV USB ports.

Televison &... | Answered 2 days ago


Contact the authorized service center for Vizio.

Televison &... | Answered 2 days ago


Go online and search for the cable provider's website. They often have guides to connect TV makes and models to their cable box remotes.

Televison &... | Answered 2 days ago


Try these codes. 0281,0285,0225. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name list" in alphabetical order. Pull up older posts.
http://electronicshelponline.blogspot.com/
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.

This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" of your device; that you want set-up code, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Televison &... | Answered 2 days ago


no it cant, if the images are not high def they will not be as sharp, just like your tv a high def tv show compared to the old analog tv show, the source is the same

Televison &... | Answered 2 days ago


The screen will display the resolution of the signal that is sent to it by the source. If you are connected to a computer, you may be able to change the resolution by changing the graphics settings. Right-click on the desktop or use Control Panel/Device Manager. If you are connected to a TV broadcast signal, you do not have control of the resolution, but there are still some broadcast signals that are Standard Definition (SD or 480P). If your source is cable TV, you may be able to tune to an alternate channel that is SD. If you subscribe to an optional HD service, you can cancel that subscription and you will only receive SD signal. That's all I can suggest. I hope that is helpful.

Televison &... | Answered 2 days ago


There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

Televison &... | Answered 2 days ago


Only from the manufacturer, if available.

Televison &... | Answered 2 days ago


You can try a firmware install to see if that cures the problem of a corrupted software. If no results then the laser assembly has lost its ability to read blu ray disks.

Televison &... | Answered 2 days ago

Not finding what you are looking for?
Rotel New Original RR-1060 Remote Control Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top Rotel Televison & Video Experts

Raj Patel

Level 3 Expert

1036 Answers

deton8 von Splosion

Level 3 Expert

3309 Answers

Tom Chichester

Level 3 Expert

51852 Answers

Are you a Rotel Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Rotel Televison & Video

  • Rotel Televison & Video

Most Popular Question

rotel rbk d8100 power light blinking

  • Televison & Video
Loading...