20 Most Recent Sanyo ECJ-D100S Micom 10-Cup Rice Cooker Questions & Answers

Dear anonymous you have probably found it by now, if not try this site: http://manuals.com/ All the best, Kolbrun

Hi, Amazon offers pretty large number of inner pots. Go here Amazon com inner pot and pick of them (which one fits). feel free to ask sellers anything. I hope this was helpful. Enjoy

I am new to the rice cooker scene, but, I'll bet that I know exactly what's wrong with your cooker.
Are you handy with a screwdriver?
Can you open it up?

If so, I might be able to talk you through fixin' it!!!

I have the same problem today. I'm lucky to find this thread and fix the problem. The cooker have two broken wires. The good news is that one wire is black and the other is yellow. If both were yellow, I might have to figure out which one connects to which.Thank you all for the questions and answers,Liyan

My suggestion is to contact Sanyo Product Support. This problem could be an issue with the internal power supply. They should be able to help you directly. Here is the link to their support site:

http://us.sanyo.com/customer-support-extended?p_sid=aoMG7Iuk&p_accessibility=0&p_redirect=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MCwwJnBfcHJvZHM9OTUsOTgmcF9jYXRzPTQ5JnBfcHY9Mi45OCZwX2N2PTEuNDkmcF9zZWFyY2hfdHlwZT1hbnN3ZXJzLnNlYXJjaF9ubCZwX3BhZ2U9MQ**&p_srch=1

Hello,

if it does not power up, then it means its having a power problem. it might have worked fine in the past, but that's electronics for you. Power surge, irregular power supply, excess power supply, etc can affect the unit thereby not making it to power on.

This unit must have a power supply board in it where power enters from the mains. A capacitor, fuse, diode, etc may have been defective on the power board and maybe that's why its not making the unit turn on. There might also be some disconnection or something, inside the unit which is not making it to power on.

To actually find out what's wrong, you need to disassemble the unit with a screw driver and check what's wrong. You will be needing a meter in order to test the components on the power board, once you detect any bad component, you can make necessary replacement at any electronics accessories store withing our vicinity. This is the only way by which you can detect the problem.

Of course, testing the power board with a meter will require someone that has the ability. So it you can't, then you might be needing the help of a repairman or you can call a friend that has the ability to help you out.

I wish you the best of luck.

OOPS! Accidents happen Mary Ellen. Don't be too hard on him. Here is the link I use to get most of the manuals I need to tear things down and put them back together. http://www.manualsparadise.com/t1001/Q100228/X76171_Sanyo_service_manual_repair_manual_schematic_diagram_owners_manual_users_manual_parts_list.html

Joe

Firstly check fuse in the plug if no avail Then could be element or thermal trip/ check if has customer reset cut out.....Please leave feedback

Hi.

Please click here to download the instruction manual in PDF format.
You will need to have Acrobat Reader installed on computer to read the manual. Most computers have Acrobat reader already installed.

Here also the support page.

Regards.

You can get the driver here. just scrol down till you hind your camera. It is there but listed as model # m6217

http://www.mingjong.com.tw/eipe/front/bin/ptlist.phtml?Category=100012

Good Luck