20 Most Recent Rolex Explorer II 16570 Wrist Watch - Page 2 Questions & Answers

well your watch is most likely a watch that goes off by your body pumping so when you take it off it will stop soon after 

All Rolex watch bracelets has screws, not pins. Get small screwdriver and unscrew them.
If there is no screws at all, that means bracelet links had been removed and you have shortest version allready ,or, this is not the real (genuine) Rolex bracelet.
Find your nearest watchmaker to clarify all this.

Hi,

You can contact a rolex reseller :

www.rolex.com

Thanks,
Thomas

Simply unscrew the crown and then turn it clockwise (or counter-clockwise). The 24-hour hand should jump one hour at a time in either direction. If you pull the crown out to the next notch, the date will change. If you pull the crown to the 3rd position, it will set the regular hour and the minute hand.

I hope this helps!
Regards,
CharlieJ

[Please rate this solution, if it helps you.]

yess you can i have one

klljklj

You need to watch this video its given how to set time in Rolex watch's :

1) un-screw the pin by turning it towards you, until the spring pops it out. 2) pull the pin out to the next notch 3) turn the pin towards you and watch the date change (if the minute hand is moving when you turn the pin, you pulled out too far).
-Mike
www.perfect-timing.biz

At Ticker24, we take pride in making the most worthy and iconic timepieces accessible to all which is just as good as the authentic ones. Our passion and 15+ years of expertise in delivering luxury watches to our customers led us to this dream project of offering our collection of top-notch quality luxury replica watches. https://ticker24watches.com

This is the hint regardless of Rolex. Look at the second hand and watch the motion! Does it sweep or tick? If it ticks it is battery operated watch knockoff. Rolex is a self winding watch thus the second hand sweeps does not click each second.

You can, but putting in back on and not cross threaded is a lot more difficult, plus it has a sealing gasket that need replacing. If you want to play with a $10,000 watch, fine. :>) Hold the watch firmly, turn the ball to the left until it starts to unscrew. Keep going until you can grip the back of the watch with your fingers and turn it some more. Pull the back off.

How to Open a Rolex Watch: 10 Steps (with Pictures) - wikiHow

https://www.wikihow.com > ... > Jewelry > Watches

Contact ROLEX has to be something they did. Mike

The simplest way to find out is to take it to a Rolex specialist repairer and ask them to look at it. They will know what small clues to look for to find out. Some of the clues could be inside the watch on the inside mechanism so a watch repairer will have the tools to open it correctly.

Fakes are getting better, but a jeweller removing the back will always tell the truth. There are some good videos in the link. https://www.google.com/search?q=rolex+daytona+fake+vs+original ..

This link might help: https://www.google.com/search?q=HOW+TO+FIX+Rolex+electric+watch+not+working?&source=lmns&bih=568&biw=1366&hl=en&sa=X&ved=2ahUKEwi-y6HgsL_wAhXgBrcAHZ8lDvAQ_AUoAHoECAEQAA

Its not unheard of depending on the age of the watch (you say you purchased it 16 months ago but it could be a 15 year old watch.) If it was a new Rolex watch you have a 5 year warranty, so it should cost you nothing. If it was a pre-owned Rolex you should have received a warranty from your jeweler, most of those are 2 years. If this is a watch with value, and one you will either hand down or at some point resell then sending an older watch to Rolex is the proper direction - save all the repair documents, with the original receipt and the box. A Rolex Explorer II in good condition in US is about $5k, so $380 for a repair, though high, is worth it. I would recommend that if you do send it to Rolex for this repair and it is an older watch have it serviced too. The watch is returned to you in perfect condition with fill documentation. Lastly, you need not to send it to Rolex at all. Any good watchmaker/repair jeweler can do this for less than $380US.

https://www.youtube.com/watch?v=RzQcj1ulIkQ "Five hundred dollars for a '93 Rolex Daytona," he says, "I'll do it!" That same watch is valued at around $16,000-$19,000 now, depending on its condition.Jul 30, 2012 https://www.exquisitejewelersmiami.com/blogs/rolex-daytona-watches/6351872-the-rolex-daytona Rolex Daytona Size and WeightDaytona watches are large and typically measure 40mm across. Weight for the Rolex Daytona varies based on the material used. For instance, it ranges from 148 grams for the stainless steel model, to 195 grams for the white gold, to 283 grams for a platinum Rolex Daytona. https://northscottsdaleloan.com/watch-reviews/rolex-daytona/

Doubtful. if you bought it cheaply. A jeweller will be able to tell. There are many authentic looking knockoffs. :-)

My phone number,
00923222622273

Fake