20 Most Recent Tefal MagiClean Work Top Blender - Page 3 Questions & Answers

Sounds like the gear is stripped inside

It is probably due to a bad connection in the motor. You will need to take it apart and check the connections.

It Could Be a Number of Things.. It's most likely that the electrical Wire Could Have a Shortage, If it cuts off again Try gently Wiggling the Electrical Wire in a Number of Directions If it cuts on and off while your fidgeting with it, you've found your Problem! A quick fix would be to Adjust the wire In the position it would cut on the strongest, wrap the cord with Tape to Keep the wire in that Position, this will Prevent it from shorting again. Either that or you simply put too much product in the Blender with an inadequate amount of liquid.

Google make model disassembly. all question s need 'make model (what it is)'.

I have the Margaritaville Bali DM3500 and the motor has gone out on the self Serv section What is the part number and how do I order a new one ?

Question edited for clarity, and 'Vitamix' one word. Is it the right one? does it look like this? https://www.vortexrestaurantequipment.ca/product/vitamix-15981-32-oz-advance-complete-blender-container/ It should just press into place. https://www.google.com/search?q=Vitamix+15981+for+vitamix+5000

I would get it repaired first. That may avoid a fire!

Question edited for clarity. Question moved from Refrigerators. Contact the company direct with a view to having it repaired or replaced under warranty. https://www.margaritavillecargo.com/bahamas.html ..

If you add up the total power draw and take it away from the solar panels 60W ... if you have a negative number, easy answer is no.

Question edited for full 'make model (what it is)' based on model number. Question moved for Coffee Makers to Blenders. It seems there are two sizes https://www.google.com/search?q=cooks+power+blender+xb9218wa+parts ..

The screws are hidden underneath the feet, and they just pull out. This video shows complete disassembly. https://www.youtube.com/watch?v=wJ0by1BYRt4 ..

Question edited for typo blinder>blender Question moved from Coffee Machines to Blenders No one sells them, so try the maker via the contact page. http://www.bigbosskitchen.com/contact https://www.google.com/search?q=Big+Boss+Single+Blender+replacement+cups ..

Check the blade with it off the base and make sure that it spins freely. Check the spindle on the base and see if it feels hard to turn. If the spindle turns too easy , then the connection inside the base is broken and needs replacing.

I would try searching on the official website to see if there is a replacement part for your blender.

The rubber gasket on the bottom of the blender and where the blade goes into needs to be replaced. Or just buy another blender.

If it is a removeable cord, any good electronics shop will carry it. If it is a fixed cord, Home Depot carry wire with a mains plug on it. Company Contact Details here. https://www.manualslib.com/manual/701964/Delfino-Dlbl-383.html?page=9#manual ..

I would try and search on the official website for the piece that had broke off your blender or buy a new blender then.

go on web to the manufacturer and find the parts catalogue and down load it from there.

we do not know the fix for that if you can not figure out what to do