20 Most Recent
Tag Heuer Aquaracer Quartz Chronograph CAF1112.BA0803 - Page 2 Questions & Answers
Stop watch not zeroing
Pull out winder 1 step and us the push buttons to adjust hands to 12 o.clock . when you have done this pull winder right out and use push buttons to set other hands then push winder back in.
7/24/2010 5:12:46 AM •
Tag Heuer...
•
Answered
on Jul 24, 2010
My watch just stopped working, i take get care of
It definitely is worth to fix. But I suspect that all you need is just a battery replacement. Don't forget, that before you purchased your watch, it was laying on dealers shelf for no one knows how long. Battery originally is fitted at Tag Heuer's workshop in Switzerland, and nobody was replacing battery when you bought the watch, so, it may have been in the watch for a year or even more before watch was sold to you.
Rate me, plz.
1/12/2010 3:34:59 AM •
Tag Heuer...
•
Answered
on Jan 12, 2010
Resetting GMT hand
I have CL1180 and had the same problem, pulling the winder out to position 2 (fully out) and using the buttons resets the second and 10th second hands and putting the winder in position1 and using the buttons does the same for the minute and hour hands. However finding position1 was tricky, only seems to work on the way out from fully home and not on the way back from pos 2.
Hope that helps.
6/15/2008 11:37:57 PM •
Tag Heuer...
•
Answered
on Jun 15, 2008
How to synchronize Tag Heuer CAN1011.BA0821?
Unscrew the crown, start the stop watch on the time signal. Stop the second hand at 12 o'clock and reset the time (taking out the back lash on the minute hand) Start the watch as the stop watch second hand hits 12. Screw down the crown. Done.
10/24/2014 6:54:50 AM •
Tag Heuer...
•
Answered
on Oct 24, 2014
Not finding what you are looking for?