20 Most Recent
Remote Start System - Page 4 Questions & Answers
The light on my remote stays on all the time
If the light in your remote is on all the time then there obviously a malfunction internally. The contacts could be corroded or, the contact covers (rubber buttons that you press) are broken. Take the remote apart to ascertain the cause of the problem.
Remote start sends signal but truck just cranks over no start
Change the batteries in the remotes.
What happens when you press your starter button is it sends signal to the car to crank and then it needs to send another signal to start. The second phase would fail because the battery in the remote was low. Try replacing the and see if that works
5204 viper wont start in the morning
Ask the alarm where did he put the alarm ecu.
If it too close to the factory A/C drain at the center / bottom of the console then moisture can damage the alarm ecu.
Warp the alarm ECU in plastic bag to rule out moisture problem.
Drain / clean A/C drain tube will prevent moisture / odor problem in the cabinet.
Getting Viper 5301 to turn on heat fans in 2005 Mruano
Most likely only one of the cars 2 accessory circuits was powered up by the remote start. There definitely are 2 (red and white/blue). Please double check with multi-meter before just hooking up. But that should solve the no fan upon remote start.
Not finding what you are looking for?