Tag Heuer WK1111BA0317 wristwatch - Answered Questions & Fixed issues
I can not get clasp
Honestly, I would ask a local jeweler who deals with watches to assist you on your watch. Not seeing the watch I have no ideal what is wrong with it Anyone who deals with watches should be able to figure out why it will not open.
8/11/2010 7:11:19 PM •
Tag Heuer...
•
Answered
on Aug 11, 2010
•
523 views
My watch stops and starts - for example I will
from experience this generally happens when the battery is low, the tick will appear normal however the time does go round in sync with it. Replace battery would be my first point of call
10/7/2009 11:29:51 AM •
Tag Heuer...
•
Answered
on Oct 07, 2009
•
1,047 views
Tag watch second hand skips
Yes it's the battery. Please make sure to take it to someone QUALIFIED This watch requires that all the gaskets be replaced and pressure tested at the time you have the battery replaced
Donald McPherson
www.finewatchmaking.com
6/27/2008 4:43:07 AM •
Tag Heuer...
•
Answered
on Jun 27, 2008
•
10,823 views
I have a kirium model cl111a how do you adjust the time please ?
You probably have a screw down crown. Turn the crown counterclockwise and unscrew the crown. Now you should be able to pull it out. When tightening it back down, don't over tighten, just snug. This is to keep moisture out of your watch. Always have it screwed down unless you are setting the watch.
7/2/2019 6:12:56 PM •
Tag Heuer...
•
Answered
on Jul 02, 2019
•
301 views
What kind of watch winder do I need for this watch
You have selected a wonderful watch... Heuer and TAG/Heuer should be gently wound by the motion of the human wrist and the falling of a centrally pivoting weight (there is no ideal direction).
AUTO-WIND function is NOT at all unique to your watch...
After a couple of CHEAPER "winders" failed me... and after I figured about 4 watches was more than enough to keep wound... I found the greatest BASIC watch winder... to run year over year (efficiently and quietly)
MTE watch winder (their very basic WTS-4).
Good luck: I WILL try to include the URL (see page 6)
http://mte-watchwinder.com/fileadmin/PDF-Uhrenbeweger/MTE_Watch_Winder_Brochure_Engl.__09-2015.pdf
7/30/2020 12:51:36 AM •
Tag Heuer...
•
Answered
on Jul 30, 2020
•
357 views
Heuer chronograph second hands will not reset to
Pull out crown and then push the upper button and hold it. The chrono hand should start move and you should be able to adjust it. If this doesn't work, try the same with lower button. When adjusted - push the crown back in. In fact there are very many variations how to reset chrono hand, but exact advise can be given if the movement caliber of particular watch is known.
Rate me, plz.
5/12/2016 8:38:48 PM •
Tag Heuer...
•
Answered
on May 12, 2016
•
1,785 views
Not finding what you are looking for?