HTC Touch HD Smartphone - Page 7 - Answered Questions & Fixed issues

its probably a forcloser which happens when you have a lot of application. One of the applications is causing it. You should remove all applications and reset the phone or see if the company can give you a phone under warranty

http://www.hardreset.eu/htc_touch_hd_hard_reset_soft_reset_en.html

try to perform a hard reset and see if that will fix your problem. But before you do ill have tell you will lose all your information on that phone once its hard reset.

Hope this will help you...thanks

You can easily get your htc unlocking code online.when i suffered with the problem and i wanted the code then my friend suggested me the site from where i got my htc unlocking code.click here to get your unlock code.

hope this helps..

A lot of sites do unlock but there is this site I used couple of times and it pays best since I've been unlocking phones.

You get full money back guarantee.

Visit http://www.mobileunlocked.com/index.php
and just follow the site prompt.

Good luck and remember to rate this solution.

http://forum.xda-developers.com/showthread.php?s=e7b9ee91b3ee467e9382dc9fe2cce302&t=450217

this is to install arabic on it

Hi,

Here i like to provide a solution for you problem.i.e.,find a filebuzz.com website and get ur valuable software in various advance categries.It describes file size,versions,prices and needed features

Go to the support site of HTC. Make sure your files are back up and the battery is fully charged: http://www.htc.com/www/support.aspx

try re calibrating the screen

As you have not specified in particular what is the unlock code required for you, i am giving the ways to unlock all the codes

NETWORK UNLOCK CODE:

You can unlock it by flashing your mobile if your mobile is a CDMA mobile...
The procedure for flashing your mobile is in the link below
http://hubpages.com/hub/How-to-Flash-your-cell-phone
It has an video explanation.

If your mobile is not an CDMA mobile , you can get the network unlock code(NUC) by just contacting the current network provider customer care department.It is free of cost.

The restriction code can be got from your old service provider..This restriction code is kept to prevent someone who stole the mobile from using it with another provider...

They will have a security check done with your date of birth etc..to verify whether you are the exact owner of the phone..

After that they will provide you the restriction code to unlock it and use it with another service provider..

It is all free of cost do not pay anyone for this seeing some advertisement over internet . That is all fake ads.

The above procedure works and you can verify that by seeing the rating of an happy customer here..
http://www.fixya.com/support/t4979448-need_unlock_motorola_razor_v3_from_optus

PUK CODE:

PUK code can be given only by your service provider which is specific for each and every mobile number.
Contact your sim customer care department over phone. Its free of cost to get the pin or puk no. If you cant contact through your phone get some other phone and contact them.
Go to the nearest service outlet of your service provider they can also help you.
There is no other go than the above procedure only your service provider can give it nobody else in this world nor any software.
Go to the below link and you can confirm that the above procedure works and there is a testimonial given by the customer too. http://www.fixya.com/support/t3079596-sking_puk_code

PIN CODE:

HI If you are asking for pin contact your service provider , he will give you a default pin .

If you try pin more than few predefined no of times your phone will ask PUK code which can also be given only by your service provider which is specific for each and every mobile number . Do not try PUK(new pin code) code many times or else your sim will be blocked and you will need a new sim.

Contact your sim customer care department over phone. Its free of cost to get the pin or puk no.
Go to the nearest service outlet of your service provider they can also help you.
There is no other go than the above procedure only your service provider can give it nobody else in this world nor any software.

SECURITY CODE:

If it is lost nothing can be done. You need to flash your mobile at an authorized service center which will reset the mobile memory and also all the data inside the mobile will be lost.

A helpful rating and an testimonial would be greatly appreciated if you are satisfied with the solution i have posted.

I have HTC smart which can not read arabic letters

Take out your memory card and use a card to access it on the computer and there you may delete your music. For a final solution for phone you may want to reset it after coying out your contacts.

1. Download the latest activesync and connect your mda to your computer and verify your device is connected(not as guest)
2. Perform a soft/hard reset on your MDA then tap your screen to start the screen alignment wizard
3. Download the remote screen alignment tool attached and install it on your machine.

You can easily get your htc unlocking code online.when i suffered with the problem and i wanted the code then my friend suggested me the site from where i got my htc unlocking code.click here to get your unlock code.

hope this helps..

As far as i know my friend free unlock codes are not working properly.when i suffered with the problem my friend suggested me the site from where i got my unlock code.its not free but its as much cheap as free.click here to get your unlock code.

hope it helps you..

Hey friend i don`t know the code actully but i know the site from where i got mine you visit there i know you will also find yours..click here to get your unlock code.

hope it helps you..

try unlock codes from http://www.theunlockarena.com/ to unlock your phone

change memory in use from phome memory to external memory
go to setting and check for memory in use

how to unlock service

hi,,
Do the hard reset or reinstall the OS. In the both cases you will loose your data stored on phone memory and all your passwords will be set to default...
Hope this has helped you... Thanks

plug your usb cable to computer then power phone on then plug up phone to computer