2006 Yamaha Road Star Midnight Silverado "valve setting 2000 bear" Questions

...it has a noise in the front head of the engine when its hot and the engine is reved up. i set the valves and looked at the timing chain tensioner when i was in there, it looked ok but i still have

...load up the links of the timing chain if the cam is gear driven the excessive end float will alter valve ...

...2000 Yamaha Big Bear Professional 400 4x4 and it won't start.There is spark and its getting gas.We cleaned the carburator,put in a new plug,changed the oil and it still won't start.Some time it will ...

...choke off. Problem is there is no power at all at low revs, blip the clutch a little and the power valve kicks in and the front wheel lifts off the ground all the way to 3rd gear. On flat ground i ...

...spacer placement on 2005 flht Install or place the wheel into position between the forks with the valve stem on the right side of the vehicle. THEN coat the axle with bearing grease. THEN while ...

...2000 rpm loosing oil is a requirement to check for sump leaks (front or rear main seals or rocker cover gaskets ) Burning oil however is a different set of indicators that may indicate bad valve stem ...