2006 Yamaha Road Star Midnight Silverado "mikuni carb problems" Questions

mikuni hsr 42 carb on it,easy kit42-11,high flow petcock,longer pull cable,and removed the fuel pump.after this mod you will have no problems with gas dumping out ever again.WARRNING!!! YOUR BIKE WILL

can the carbs on a kawasaki gpx 750 1988 model go on a kawasaki gt750 model 12/84 model? they are mikuni 175y yyi stamped om them.. the gt750 carbs are spaced further apart cos its air cooled the ...

...Mikuni carb won't run. When cranked, the front cylinder backfires out the carb. Is the exhaust valve not opening? What could be the problem? There is probably a small leak in the intake tube to that ...

...my elan ski-doo 1980 250 mikuni carb floods out. Replaced all jets and still the same problem. Help The needle valve is stuck, you will have to get the carb. off and check the float and needle

Carb (Mikuni) flooding on Yamaha Vmax motor cycle one of the mikuni carbs on my yamaha V max motor cycle is flooding as soon as I switch the engine on the bowl floods and petrol pours out the breather

mikuni round slide carb, cant find the problem If the float needle is damaged or the float height is set wrong then the float can't shut off the flow of gas coming into the carb. It's the same concept

Mikuni carb, and even brand new the RPM increases routhly most of all with no gear engaged until too hight RPM and the decreases. Seems to be out of control. From the throttle handle to the end of the

...Carb is a Mikuni BST 40 and it may be used in the F650 but I am not sure. It really depends what the problem is but I am sure most can be fixed by checking and cleaning the carb. Mine had a problem ...

...mikuni vm22 carb on it. It's ran fine until yesterday when I would start it up and it would immediately open about 10% of the throttle. I suspected a broken seal at first and fixed that but to no ...

Just put billet intake and 34mm carbs mikuni on rz and it bogs down every time I take off ? Before I added these it ran faster with stock carbs and intake.. What's the problem? Check main needle ...