2006 Yamaha Road Star Midnight Silverado "broken key" Questions

how do I remove the seat off a 2006 yamaha roadstar? should just turn the key to the left unless the cable release is broken

...key was broken, how to start the engine if i cut the wire? Take the complete broken key to a locksmith and they can make a good key from the broken one. They also maybe able to make a key from the ...

...full 'year make model'. Question moved from Spanish car maker Seat (pronounced see-at). You need a broken key extractor tool or a locksmith https://www.google.com/search?q=broken+key+extractor

...broken or your key does not fit the lock. If you have an original key it has a key number on it. The bottom of the ignition switch should have the same number on it (A12345,Bxxxxx,Cxxxxx,Dxxxxx,or ...

...key is broken to the seat. The GPZ 250 road bike - The key is broken to the seat. The battery is going flat and won't start. How can I get the seat open without key. kinda hard just call a locksmith ...

broken key in ignition, how to unmount it and get the part of the key out? if you can get it off of the bike which should only be a couple of bolts and a wire harness...take it to a good locksmith. ...

...key would shut off when turning left. Wiggled wires and now not elec power. The wiring harness running from the ignition switch to the ECU on the RHS of the frame has broken. You will have to cut it ...

...key is broken off in the lock, you will probably have to have the broken part extracted by the dealer or by a lock smith. MOST locks on fuel tanks that I am familiar with aren't really locks in the ...

BROKEN CABLE turn key to center, push in about 1/8 inch (there are actually 2 functions to right) when you have turned it as far as it will easily go it should click and it should raise easily. If you

...ignition. Take the bike to a locksmith where they should have a broken key extractor tool, and then have them cut a new key from the broken piece of the key. It should not be too difficult for