2006 Yamaha V Star 1100 Classic "remove rear seat" Questions

...remove the rear seat , remove the screw at the back of the seat and lift the back and pull the seat toward the rear of the bike to unhook the front. On the Classic this should reveal a bolt at the ...

...that and the seat will come off if you pull it up and back. Front seat, there are two allen bolts which were under the rear seat. Remove them and the front seat will come off if you pull up and

...rear part of the seat to find the 5-mm Allen bolt. Remove it with the Allen wrench. 4)Grasp each side of the seat and simultaneously lift it upward and backward to remove it from the Yamaha 1100. I ...

seat down located somewhere around the rear of the seat aprox 2 inches below the seat. if your talking about the seat cover you have to remove the staples thats holding the fabric down to the seat pan

...rear fender) 3) Remove the front seat (two allen bolts at the back of seat) 4) There are two metric 12mm bolts under the front seat that hold the tank down. Remove them. The tank should be sitting ...

remove the foot peg bolts. Then the rear passenger seat. Easy to adjust the angle of the bracket by loosening the foot peg either side. Pull up, push down or bend out to get proper position. Good luck

...V star 2002 Remove plastic covers from the heads (front on left side of bike, rear on right side). Use the spark plug wrench that came with the bike in the toolkit. You do not need to remove the

REAR FENDER ON A 2002 YAMAHA V STARR 1100 CLASSIC? HMM, Remove seat, and any wiring to tail light, Licences plate light etc. then proceed to remove bolts that attach fender to frame. Roll it backwards