How do I add break fluid to rear breaks the rear brake reservoir is at the front r/h side of the bike on the frame rail just above the rear brake lever,you need to remove screw that holds it to remove
Question about Yamaha V Star 1100 Classic Motorcycles
...rear brakes done on my Yamaha 2000 Vstar 1100 Classic. The question is what brake pads to use....oem, EBC HH or Organic, DP Sintered, Vesrah Sintered or other? Or different on front or back so the ...
...thank you deric CHECK THE SWITCH AT THE FRONT HAND BRAKE THEY SOMETIMES STICK ALSO MAKE SURE YOUR REAR BRAKE SWITCH IS ADJUSTED ...
Question about Yamaha V Star 1100 Classic Motorcycles
...to get the pressure back. The best way to do that is to start at the banjo fitting right at the rear master cylinder and crank the banjo bolt loose while holding pressure on the brake pedal. Only ...
...with brake hose connected and set aside. Unbolt axle clamps each side. You home free. For the rear, juck stand, loosen rear axle nut. Pull calibers, set aside. Need to wiggle tire backward so ...
...a new tire on Pump up brakes hold them then releace bleader on rear calaper when fluid stoppes comming out sut bleeder screw Repete 2 or 3 times check master cylinder dont let it get low MOPAR ...
81 questions posted
Usually answered in minutes!
469 Questions
188 Questions
192 Questions
110 Questions
106 Questions