...clutch spring height to make sure they are good. You need a surface plate (very flat measuring tool) to make sure the metal plates are flat. Then you replace the friction plates and put it all back ...
...Then the friction and metal pressure plates slide out from the center clutch hub. Install a friction plate then a pressure plate, friction, pressure, friction etc.. Please rate my answer.
reached when you cant tighten the lever any more. Time to replace the clutch plate/s. And when the clutch plate/s is/are completely worn out, the bike will not move forward. it will just rev up static
...replace the clutch cover gasket or you will have problems. Personally I'd chose the first recommendation, I have done it hundreds of times for customers and saved them lots of money. Best of luck, ...
clutch plates broke (3 of them) Hi, Tom for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0
REPLACE CLUTCH PLATES ON A 1981 YAMAHA XJ550 Buy a clutch cover gasket. Take clutch cover off, remove 5 bolts and pressure plate, pull each plate out one at a time keeping them in order, replace with ...
...replace my clutch kit. i burned it out i need to know how to replace the clutch kit on my bike. its a 2007 gsx-r 600. i dont want to pay for a labor. so i rather do it and learn my self. ello ...
replace the clutch shell if either the sprocket or ring gear are badly worn or damaged. ALSO check the slots that mate with the clutch plates on both the clutch shell and the hub and replace the shell
...clutch basket and you need to remove the center plate with about 6 bolts , then remove the fiber coated plates along with metal plates .. then replace first a fiber coated plate followed by a metal ...
200 questions posted
Usually answered in minutes!
183 Questions
167 Questions
125 Questions
113 Questions
117 Questions