...aligned with the stationary pointer on the crancase cover.Fit the timing chain onto both camshaft sprockets and install the camshafts on the cylinder head.The camshafts should be installed onto the ...
...bike to build up more rpm's on take off well there are a few ways 1) Gearing, get a smaller front sprocket or a bigger back sprocket that would make it go slower but have more power. To make it ...
sprocket size Front: 13 Rear: 48 *Help me out. Rate me!
...before taking it apart. It could be a lot of things but most likely is the clutch main basket.The sprocket attached to it uses springs to absorb the torque from the crankshaft.Those springs work ...
...a yamaha yz 125 2008 model will they fit on my bike or has things changed since then? like will my sprocket fot onto that rim and is the axel the same ect? Thank You for your help YOU MIGHT BE
...drive gear, shift shaft assembly, kick start assembly, water pump, rotor, stator base assembly, sprocket and miscellaneous other small items. Remove all case screws then split the case halves ...
...the transmission oil, then remove the side cover that is on the opposite side from the rear drive sprocket. You should see the clutch at that point. Remove the cover screws (count the turns) and ...
694 questions posted
Usually answered in minutes!
147 Questions
12 Questions
8 Questions
7 Questions
1 Questions
