Question about Yamaha V Star 1100 Classic Motorcycles
starter not turning after winter. battery was removed/charg I replaced the battery which was removed for the winter and charged up. checked the 6 fuses which are all intact but not even a glimmer from
Question about Yamaha V Star 1100 Classic Motorcycles
...clicks but won;t engage the starter . Charge battery to full, start in neutral, still clicks? Bad ground, or bad connection. Jump starter solenoid with screwdriver,etc. if motor turns over the relay ...
Question about Yamaha V Star 1100 Classic Motorcycles
...clicks under seat; will not start ran great one day; the next day there was a clicking sound under the seat and it would not start; I replaced the battery and that was not it. check starter relay ...
Question about Yamaha V Star 1100 Classic Motorcycles
when i try to start i get a click the starter doesn't move is it the starter relay or the starter itself? to find out take your starter off and run a positive to the starter and the ground to a bare ...
Question about Yamaha V Star 1100 Classic Motorcycles
...clicking noise from under seat...fuses there look good. Battery charged. Lights bright...press starter button...just clicks Check the starter motor for continuity. I expect the brushes need
Question about Yamaha V Star 1100 Classic Motorcycles
2007 v star 1100 - starter just makes a click sound when I remove the starter from its mount, and ground it and hit the starter switch it spins up. Replace the solenoid under the seat
...started will start fine with pull start has comp,fuel and spark Sounds like a problem with the starter, could be a starter fuse, relay or solenoid. The start cicuit wiring could also be damaged. ...
...clicks when you push the starter button, therefore the starter button is good. Jump the two terminal posts on the starter solenoid together, This will send power directly to your starter. If your ...
Question about Yamaha V Star 1100 Classic Motorcycles
clicks, starter motor ok check wiring out found to be ok sounds like the starter relay is begging for amps,, have the battery LOAD tested, you may have a voltage that reads 12 volts, but the amps aren
484 questions posted
Usually answered in minutes!
188 Questions
192 Questions
110 Questions
106 Questions
77 Questions