2001 Yamaha SR 125 "carb settings" Questions

Ad

Question about Yamaha SR 125 Motorcycles

1 Answer

...carb is dirty from old fuel. Once clean the carb will respond to screw settings. Turn for the smoothest idle. Timing may not be an issue if it has electronic ignition. It is not adjustable on

Ad

Question about Yamaha SR 125 Motorcycles

3 Answers

...in the cup? Dump it, clean it and re-mount it, ( not all bikes have a water trap bowl ). Drain the carburetor. There should be a screw on the lower side of the carb float bowl. Remove the screw then ...

Ad

Question about Yamaha SR 125 Motorcycles

1 Answer

...carb mix settings . Only use premium unleaded gas. No Ethanol blends. LIGHTLY seat the air screw and the throttle screw. Now open up each of them one and one half turns. This is the stock

Question about Yamaha SR 125 Motorcycles

1 Answer

...carb settings Need to know the stock jet sizes, float level and initial air/idle mixture settings for 1981 sr185 Righhttt And I need some new brain cells, stock jet size is .075 float level in ...

...carb but cant remember all the settings for air 2 fuel mix the bike runs well i think its not getting enough fuel or 2 mutch as she back fires tried the old 2 terns fron light tight trick have u any ...

Question about Yamaha SR 125 Motorcycles

1 Answer

...till highest vac setting. then match next carb to first carbs settings (same vac) if u can't match adjust first carb to 2cd carb's highest vac setting. make sure engine is warmed up first.then ...

Question about Yamaha SR 125 Motorcycles

1 Answer

cleaning the carbs i'm about to buy one of these and i was told the carbs need cleaned, how do you do that 1st-take off fairings & tank,seat, take carbs off. drain fuel, & turn over on bench. take ...

Question about Yamaha SR 125 Motorcycles

1 Answer

Float setting for BS34ss carb I need the procedure and measurment for float in my 1980 Suzuki GS450 with BS34ss carbs I have a set my float to 22.0 +- 1.0 for a Mikuni carb. To set floats, drain the ...

...carb settings you set the other(s) to the correct idle mixture and idle speed to align with the master carb. Otherwise you are going to need vacuum gauge and/or carb synchronization equipment to set ...

Question about Yamaha SR 125 Motorcycles

1 Answer

...carb settings i have a 1994 xcr440 liquid cooled sled i need the carb settings so i can synk them????????????????????? YOU DONT NEED SETTINGS TO SYNC CARBS. YOU NEED A CARB SYNC GAUGE. TURN THE SYNC ...

Not finding what you are looking for?
2001 Yamaha SR 125 Logo

118 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Yamaha Experts

vince

Level 3 Expert

2530 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

littlewheel

Level 2 Expert

122 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...