...off the seat,pop out the side panels,(they have two lugs per panel,then lift off the tank,dont forget to disconect the fuel gauge wire as you go,disconect fuel line and breather line from bottom of ...
...you would need anything at this point. Just pop off the valve cover and check the clearances with your feeler gauge. I'd bet they are fine, unless theres a valve seat issue- Jim ...
Question about Yamaha FJ 1100 Motorcycles
seat.Bike runs on choke at idle but will not excelerate,dies when you turn the throttle. feather the throttle past 3000 rpm and it will respond but still on choke with some back fire. but will not run
...off seat How do you take off a seat on a 1985 honda rebel? there should be two bolts behind the passenger seat, take those out. pull the strap on the passenger seat forward and pull the seat back. ...
Question about Yamaha FJ 1100 Motorcycles
...then then pull passenger seat off then take the passenger housing mount off 2 10mm bolts then you have got one more 10mm bolt that takes the drivers seat off take taht bolt out and lift seat
Question about Yamaha FJ 1100 Motorcycles
...SEAT OFF MY BIKE DONT SEE HOW TO DO IT??NEED TO GET TO THE BATTERY CANT FIND A WAY TO TAKE SEAT OFF MY BIKE NEED TO GET TO THE BATTERY....ITS DEAD MY SEAT ON MY BIKE WILL NOT COME OFF I DONT SEE HOW ...
Question about Yamaha FJ 1100 Motorcycles
...seat off of my 2002 Harley Fatboy in order to change a fuse underneath so I can get it started. To remove the seat on a 2002 Fatboy: 1. Unbuckle the ******** the seat by pushing the metal part of the ...
seat off Open tool box, at rear of seat, with key and unhook or unbolt the seat from inside tool box. Pull lever on right or left side, up under the seat. It can also be at the rear of the seat, right
Question about Yamaha FJ 1100 Motorcycles
...seat comes off 1st, seat strap wont budge, then drver seat slides back. the pillion seat has a spring screw that just spins - i also got both driver seat screw loose that are spring loaded that just ...
...seat (with key) then you will see 2 x 8mm bolts under the rear of the front seat, these are holding the seat down with plates,remove, slide seat towards the back of the bike and the seat comes
63 questions posted
Usually answered in minutes!
42 Questions
44 Questions