...lbs. (10nm / 1.0 m-kg ). Many other things could be wrong. Was the cam assembly removed incorrectly? Doing it incorrectly can damage the cam, cam caps and cylinder head. Is the cam runout out of ...
Question about Suzuki RM-Z 250 Motorcycles
...lbs of torch do you use for rear tire bit confused. Do you want the psi of the tyre or the torque of the rear wheel axle. Tyre should be about 21psi Rear Axle Nut: 98 N-m (10 kg-m, 72 ft-lb) Rear ...
...lbs. (4.5 kg) of force at the midpoint of the bottom belt strand. Belt deflection should be within the range specified. If belt is still not within specified range, readjust accordingly. FLHT/C/U - ...
lbs) @ 9000 RPM Valves per cylinder: 4 Starter: Electric Cooling system: Liquid Gearbox: 6-speed Transmission type final drive: Chain Physical measures Dry weight: 183.0 kg (403.4 pounds) Seat height:
...W24ES Gap 0.7~0.8 Tightening: 2.5~3.0 kg-m Torque 18.5~22.0 ft-lbs You can find more information in the below service manual link for z650 Get it from the below link: http://goo.gl/uhXFBz Good ...
...lbs) @ 10500 RPM Starter:Electric (Digital transistorized, with 3D mapping) Cooling system:Liquid Gearbox:6-speed Transmission type final drive:#525 O-ring sealed chain Physical measures Dry ...
...kg (460.8 pounds) General CategorySport ModelGSX 750 F (Katana) ENGINE Type748 cc, oil/air cooled, 4 - cylinders in line, 4-stroke Power100 hp (74.6 kW) @ 10500 rpm Bore x stroke (mm)73 mm x 44.7 mm ...
Question about Suzuki RM-Z 250 Motorcycles
...kg (277.8 pounds) Enduro-Offroad ModelVR 150X ENGINE Type149 cc, air cooled, single cylinder, 4-strokeStandard compression 145 lbs Power13.5 hp (10.1 kW) @ 8300 rpm Bore x stroke (mm)62 mm x 49.5 mm ...
lbs) @ 3000 RPM Bore x stroke:79.0 x 76.0 mm (3.1 x 3.0 inches) Gearbox:5-speed Transmission type final drive:Chain Physical measures Dry weight:229.0 kg (504.9 pounds) Seat height:700 mm (27.6 inches
Question about Suzuki RM-Z 250 Motorcycles
...kg (10 lbs) of force upward and verify that the drive belt deflects 8 mm for all models. Belt deflection window on the debris deflector is graduated in 2 mm increments. After the belt tension is ...
96 questions posted
Usually answered in minutes!
67 Questions
0 Questions
2 Questions
1 Questions