2004 Suzuki RM-Z 250 "seized engine release" Questions

...seized up OR the kick start-to-clutch hub gearing is messed up. The best thing to do is to remove the left engine side cover and look at the kick start mechanism. You may need to remove the clutch ...

...seized engine is step 1. not told that. i rebuilt my first motor cycle in 1963. but papa handed me and service manual for it and said READ this first;. then ask questions. just ffound this bike in an ...

...engine out & striped the clutch housing but no sign of copper filings inside. i have managed to release the pistons. there is a grinding sound from one of them. could it be that one of the rings has ...

...Could be a bad starter or malfunctioning compression release, or a seized engine. Try pulling the spark plugs and spin engine. does it act the same or does it continue spinning without drawing

...seized how do i release it? Remove the spark plug and spray a product called Kroil into the cylinder. Spray a lot of it, don't be skimpy. If you can't find this product, use any good penetrating oil. ...

...seized cable, a stuck mechanism at the carb end or a twisted or kinked cable. If it does move but the engine doesn't rev it could be a broken or disconnected cable. On top of the carb there is a ...

engine, it will cut off. Gotta ask, does the Maxim 400 Canadian have something like clutch-safety switch and kick-stand switch ? Running the headlight will provide enough of a current sink to stop the