Question about Suzuki GZ 125 Marauder Motorcycles
Old clutch cable snapped, tried replacing with new one, no pressure on the cable? As I said, My clutch cable snapped out of the blue the other day, finally got a new cable from a local online parts ...
...fit with little or no adjustments. I am aware a "Marshall" deeptone" tailpipe fits both so downpipes must be similar in size. Please help as the main difference is the bore/stroke of engine.so the ...
Question about Suzuki GZ 125 Marauder Motorcycles
a funny bit it has a little bit of metal peend over you need to bend it back, then tape the handle bar end to the engine end of the new one and slowly pull it through re fit. long time since I did one
Question about Suzuki GZ 125 Marauder Motorcycles
bought second hand dtr think its the wrong throttle cable how to fit throttle make sure the cable is not damaged and is it all adjusted properly try putting a bit off oil on it
Question about Suzuki GZ 125 Marauder Motorcycles
...handel bars if there is no ajuster on the cable you will need to cut away a bit of the outer cable to give you the slack,, but if this dont work it will mean you need a new cable or fit in an ...
Question about Suzuki GZ 125 Marauder Motorcycles
...adjust the timming chain on a yamaha xj 600 1998 model The XJ600 has a self adjusting timing chain tensioner, although it's robust enough, like the previous post say's they can stick. To remove the ...
...brake pedal quick enough,were can i adjust it to lower ita bit. thanks jezz undo the bolt that clamps the leaver on pull the leaver off and replace at a position what suits you best and re fit
Question about Suzuki GZ 125 Marauder Motorcycles
...bit and miss-fires when riden. Have put new plugs in and stripped the carb and cleaned all jets and adjusted the pilot screw as per manual have you syncronized the carbs? Can someone please explain ...
..., set carbs on a wide tickover gap on butterflies until you can get the drill bits in the gaps and adjust till all 4 carbs are set the same gaps just slightly touching the butterflie bottom edge and ...
...clip-ons---I know these will fit. We installed these on a 999 a few months ago. SPEEDYMOTO Adj. Clip-ons: 53mm Silver . You'll get a little bit of angle adjustment and a 5/8 rise for comfort as
86 questions posted
Usually answered in minutes!
28 Questions
17 Questions
4 Questions