2000 Suzuki VL 1500 Intruder LC "remove seat" Questions

Does the Suzuki Intruder LC1500 have an inline fuel filter? My 1999 model does - found easily under the seat (4 bolts to remove seat.)

...seat has become worn out. The problem is, that this carb was designed with pressed in needle seats that cannot be removed. You will need to search online for an intruder carb rebuilder that can press ...

seat the bike hasn't been started in over a year any one have a clue on how to fix this you will have to remove and clean the carb the float is stuck open it is an easy fix it just takes a little time

...plug to the gauges. I'd certainly try that before tearing anything else apart. Not hard to get to. Remove allen bolts under gas cap cover and 2 on front of chrome tank assembly, plus 3 Philips head ...

...seat remove the passenger seat and seat mounting fasteners. When installing the seat insert the tang at the front of the seat into the channel in the frame and install the seat mounting nuts, then ...

...remove the riders seat? do the rider and passenger seat come off together? have removed 4 nuts under fender but seat won't budge In the 1994 Honda VT 600, also known as the Honda Shadow VLX 600, the ...

...the front area of the forward seat each side remove the 2 bolts lift the seat and forward to remove,then you will see 2 more bolts for the rear seat remove them slide the seat forward and remove

...behind the passenger seat is the key to removing the seat assembly. If you remove the bolt, then pull the seat upward and back to remove the whole seat. the battery is just under the front seat. ...

...Remove the seat by lifting it up and back 2- Remove the front (driver's) seat). Remove the two bolts behind it and remove the seat by lifting it up and back. 3- Removing the seats will give you ...

...remove the seat? Any advice? is this just the seat itself or the seat cover? if its the seat assembly there should be 2 bolts holding the seat down located somewhere around the rear of the seat aprox ...