...ride last night a bike started to back fire again and this time shut off on me. once I got it started still was back firing at low and high speeds, made it home now it will not start or stay running ...
Question about Suzuki GSX 750 F (Katana Motorcycles
...were the valve clearances last checked? It wont idle if they're out. If you alter the valve clearances you shd sync the carbs after Ride-Safe Bike-Doc Please mark this as helpful (if it has
Question about Suzuki GSX 750 F (Katana Motorcycles
...to choke itself out and die on me....how do I fix this!! I belive its the carbs need cleaned and synced as
Question about Suzuki GSX 750 F (Katana Motorcycles
...cut off when slow down vn800 jerking and stalling like fuel cut off when slow down You might try to sync the carbs and adjust the pilots but sounds like you are due for a carb cleaning. Ride Safely, ...
Question about Suzuki GSX 750 F (Katana Motorcycles
runs and idles fine but cuts out when i ride, backfires when i rev it up Sync the carbs and maybe clean the jets.
...to fix it? Im not sure if it was rejetted but i dont know what jets should be in it. First try to sync the carbs (link 1), if you can not balance them, then you have to rejet the slow and main jet. ...
Question about Suzuki GSX 750 F (Katana Motorcycles
...the c arb and have new accel wires depending on the year of the bike carbs need to be rebuilt and synced because they are out of ...
Question about Suzuki GSX 750 F (Katana Motorcycles
...it gets hot it will not restart after turning off. bike wont restart after riding and it gets hot Sync the carbs, check the spark plugs, air filter, air/fuel mix., it must be 2 - 2,5 turns out (the ...
Question about Suzuki GSX 750 F (Katana Motorcycles
ride it. TRY TO SYNC THE CARBS, BOTH CYLINDERS MUST OPERATE WITH THE SAME AMOUNT OF FUEL AND AIR, if you change the exhaust, then you MUST sync carbs, if you can not sync them, then change the jets in
Question about Suzuki GSX 750 F (Katana Motorcycles
...1 is probably restricted and choking a cylinder. After that, reassemble, install and do a carb sync. You need 4 vacume gauges. 1 hooked to the nipple on the cover of each diaphram. sync screws ...
44 questions posted
Usually answered in minutes!
72 Questions
61 Questions
30 Questions
28 Questions
25 Questions