1991 Suzuki DR 350 S "magneto" Questions

I have a DR250s suzuki with no spark. I need a test procedure to test the magneto & ignition module. A wiring diagram would be very helpful. I have no power at the coil. Try here: www.onlinefreeebooks

...and free it up, if stuck? if the battery is flat, one should also then check that the alternator/magneto is working ok? and charging the

My lad has a yamaha ag200 1987 model with intermittent spark. Is the magneto supposed to be continually exposed to engine oil? May sound like a stupid question, but have received conflicting advice. ...

id like to know if you can test your magneto without a multi circuit tester ? if i am getting spark, is my magneto still good? how do i read the numbers to know what year i in fact have ? If you are ...

I am not getting any spark from the magneto. What could be the issue. You should check the magneto using a multimeter and the factory specs check if your magneto meets the specific values

Setting Points 1960 sportster magneto Set the points gap to 0.020". For more information on the magneto, go to this site or do a search for Fairbanks Morse Magneto. ...

...is ther something els outher than points and battery that can be a coz yes buddy the cdi ,coil,magneto use a electrical metre to check these out the magneto on the side off engine inside the ...

cam timing my 2003 yamaha yz450 how do i do it take magneto cover off find tdc on the magneto and look at the cams it should be after the inlet valve shuts and goes on the firing stroke just put a rod

...1000cc kick start is there a way to retard the spark on startup? early harleys have an impulse magneto as the ignition system that means that as you press on the crank pedal the piston moves up

how to set the timing? take magneto cover off find tdc on the magneto and look at the cams it should be after the inlet valve shuts and goes on the firing stroke just put a rod in the cylinder and see