Question about kawasaki KX 250 F Motorcycles
did a top end job put it all back to gether and nothing. i went back checked timing,valve shims , fuel its getiing spark its gott compression but still wont run. Could that mean the cdi is bad? Good ...
timing of my chain I would like have a shema of the timing for the kx250f 2004 go to cyclepedia.com and you can download a manual for about 20 bucks.
Question about kawasaki KX 250 F Motorcycles
i got a 2004 kx250f, has a rebuilt motor with new piston,rings,cams,timing chain, it has spark and getting fuel, its in time but wont start? need more info does it hit at all
Question about kawasaki KX 250 F Motorcycles
...t fix it. If you do the work yourself be sure to start with the piston on TDC compression. Note the timing marks stamped on the overhead cam. The piston and marks will need to be in the same position ...
Question about kawasaki KX 250 F Motorcycles
I have spent the better part of the day trying to bleed the brakes on my bike. I have rebuilt the master cylinder and cleaned every thing thoroughly. I have pumped the lever 2to3 thousand times. 20 to
bleeding front brakes I just got some work done on my bike and had the forks changed....so the front calipers were removed and reintalled. After that, I changed the entire right clip-on with master ...
...out of the exhaust. repacked exhaust, adjusted the floats, still have same issues check you timing could be slightly out and firing too late igniting unburnt fuel in the silencer pipes
KX250F 2005 NEEDS PUT IN TIME www.repairmanualclub.com
2006 kx250f replaced head gasket will not start,good spark,fuel and compresion,could the timing be off Hi,,,if you have drained the carb bowl to be sure there is fuel in the carb,,put a little fuel in
...i do it i need to shim the cams..and if i put new cams in,what do i do to get it back to the right timing.how do i shim them it is a very complicated task when shimming as its a matter of trying ...
78 questions posted
Usually answered in minutes!
70 Questions
16 Questions