...wiring harness on the front of it, unclip that and pull it away from the console. the bolt holding the console on is at the bottom of the console. oncle that is removed then simply push the thing ...
Question about kawasaki VN 1500 Vulcan Classic Motorcycles
...wiring with ordinary bulk wire. Ordinary insulation materials may deteriorate when in contact with gasoline. NOTE Carefully inspect hose for cuts, tears, holes or other damage. Replace hose if any ...
Question about kawasaki VN 1500 Vulcan Classic Motorcycles
...fuel tank drained. Refill with fresh gasoline. 3 Use the choke and try to restart the engine if the weather is cold. Move on to the next step if the engine still won't start or runs improperly. 4 ...
Question about kawasaki VN 1500 Vulcan Classic Motorcycles
...fuel pump fuse. And then start the engine and allow the motorcycle to run until it stalls and then turn the engine over for about three seconds to remove any remaining fuel from the fuel supply line. ...
Question about kawasaki VN 1500 Vulcan Classic Motorcycles
...fuel pump fuse. And then start the engine and allow the motorcycle to run until it stalls and then turn the engine over for about three seconds to remove any remaining fuel from the fuel supply line. ...
Question about kawasaki VN 1500 Vulcan Classic Motorcycles
...Fuel and oil lights come on at 3000 rpm and above, shut off below 3000. Full tank of gas, no ethanol. Brand new battery. About 17,000 miles on bike. Check wiring to console, especially the
145 questions posted
Usually answered in minutes!
175 Questions
60 Questions
52 Questions
44 Questions
41 Questions