2004 kawasaki VN 1500 Vulcan Classic "remove seat gas tank 1999" Questions

Ad

Question about kawasaki VN 1500 Vulcan Classic Motorcycles

3 Answers

remove the seat by removing the bolts from each side of the seat and lifting up. Remove the waning light cluster from the tank, unplug the gauges and remove the speedo cable. Take the fuel line loose.

Ad

Question about kawasaki VN 1500 Vulcan Classic Motorcycles

1 Answer

...remove gas tank on 1996 kawasaki 1500cc One bolt under the seat. Take bolts out of speedo gauge. One bolt under it. Unhook wiring and speedo cable. Raise back of tank and remove fuel line and vent ...

Ad

Question about kawasaki VN 1500 Vulcan Classic Motorcycles

1 Answer

...seat end with bolts, remove them and slide the tank rearward to release from front slide in rubber mounts. Be sure to mark each hose and where it goes before you remove them, this is very ...

Question about kawasaki VN 1500 Vulcan Classic Motorcycles

1 Answer

...remove the 2 side panels and the seat air filter you have to lift the tank dont use starting fluid drain the carbs it is always the scew with a flat slot be sure your gas is fresh it should ...

Question about kawasaki VN 1500 Vulcan Classic Motorcycles

1 Answer

...gas tank, removed & cleaned carburator. Still will not start. I can hear the ignition trying to go. But that's it. Please HELP !!!!!!!!!!!!!! HELP !!!!!!!!! A friend was trying to help and used the ...

Question about kawasaki VN 1500 Vulcan Classic Motorcycles

1 Answer

...Remove the idle screw and the air screw on the outside throat of the carb and spray into the screw holes as well. < < READ CLOSELY > > Be sure to put these two screws back in the same hole they came ...

Question about kawasaki VN 1500 Vulcan Classic Motorcycles

1 Answer

...Remove the idle screw and the air screw on the outside throat of the carb and spray into the screw holes as well. < < READ CLOSELY > > Be sure to put these two screws back in the same hole they came ...

Question about kawasaki VN 1500 Vulcan Classic Motorcycles

1 Answer

...Remove the idle screw and the air screw on the outside throat of the carb and spray into the screw holes as well. < < READ CLOSELY > > Be sure to put these two screws back in the same hole they came ...

Question about kawasaki VN 1500 Vulcan Classic Motorcycles

3 Answers

...Remove the idle screw and the air screw on the outside throat of the carb and spray into the screw holes as well. < < READ CLOSELY > > Be sure to put these two screws back in the same hole they came ...

Question about kawasaki VN 1500 Vulcan Classic Motorcycles

1 Answer

...Remove the idle screw and the air screw on the outside throat of the carb and spray into the screw holes as well. < < READ CLOSELY > > Be sure to put these two screws back in the same hole they came ...

Not finding what you are looking for?
2004 kawasaki VN 1500 Vulcan Classic Logo

145 questions posted

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5914 Answers

Marvin
Marvin

Level 3 Expert

85108 Answers

richard libby

Level 2 Expert

208 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...