...it senses a loss of compression (like a spark plug being removed). You need to leave the spark plugs in the heads, and get another plug and put it into the plug boot and ground it to check for
Question about kawasaki KLR 250 Motorcycles
...Remove the spark plugs using a spark plug socket attached to a socket extension. 5 Install new, properly gapped spark plugs into the motor with a spark plug socket. Tighten the socket until it is ...
...CBR 1000RR ... Mar. 8, 2015 Rim swap rotor fitting ' Honda CBR 1000RR Forums Jul. 29, 2018 No Spark plugs avail anywhere in North Jersey?? ' Honda ... May 11, 2013 More results from ...
Question about Harley Davidson Motorcycles
...remove a spark plug and touch it on the side of the motor...then crank it over...do you have spark? Hi Michael, when checking for spark the CKP needs to measure the compression bump in order to send ...
Question about kawasaki KLR 250 Motorcycles
...spark plugs in the heads. Spin the engine with the starter and watch the spark. If the spark looks good, install the new set of plugs in your engine and try that. If not, you need to check the output ...
...remove the spark plug and put it back in the spark plug cap. Then ground it to the engine - you should be able to lay it against a non-painted portion of the engine. Make sure there is good ...
...Remove the main jet thru the 17mm drain bolt in the bottom of the carb, note the size stamped on it and get the next larger size. A selection of main and pilot jets a couple sizes up and down from ...
45 questions posted
Usually answered in minutes!
16 Questions
4 Questions
